PR6426/010-010+CON021 EPRO 32mm Sensor& Signal Converter

PR6426/010-010 is an original EPRO (Emerson) eddy current sensor, combined with CON021 preamplifier to form a complete set of systems for rotating machinery shaft vibration / shaft displacement monitoring. It is specially designed for online monitoring of key equipment such as steam turbines, gas turbines, fans, compressors, etc. The product adopts a non-contact eddy current measurement principle, which can accurately collect key parameters such as shaft displacement, vibration, eccentricity, and rotational speed, meeting the API 670 international standard. It is widely used in equipment protection and condition monitoring in industrial fields such as power plants, petrochemicals, and metallurgy.

PR6426/010-010 Eddy Current Sensor

 

1. PR6426/010-010 Sensor
Measurement type: Eddy Current Displacement Sensor
Range: ±1.5 mm (linear range 3 mm)
Sensitivity: 8 V/mm (with CON021)
Resolution: ≤0.1 μm
Frequency response: 0 Hz – 10 kHz (DC response, capable of measuring slow rotation / surge)
Linear error: ≤±1.5% F.S.
Rated air gap: approximately 2.0 mm (midpoint)
Probe temperature: -35℃ ~ +180℃ (can reach 300℃ temporarily)
Protection level: IP67 (waterproof, oilproof, dustproof)
Pressure resistance: 6500 hPa (94 psi)
Vibration resistance: 5g @ 60Hz
Applicable materials: 42CrMo4 and other magnetic conductive metal shafts
Compliance standards: API 670, DIN 45670, ISO 10817-1
Explosion-proof: With safety barrier, it can reach Ex ib IIC T6/T4

 

2. CON021 Preamplifier
Power supply: -24V DC (typical -23V ~ -32V)
Output signal: -4V ~ -20V (linear range)
Response time: <15 μs
Connection: LEMO connector (sensor) + screw terminals (power / output)
Protection: Open circuit / short circuit / reverse connection protection
Protection level: IP20
Operating temperature: -30℃ ~ +85℃
Installation: 4×M5 screws for fixation

High-precision non-contact measurement, no wear, long lifespan
Wide frequency response, covering both steady-state and transient vibration monitoring
Industrial-grade durability, resistant to high temperatures, oil contamination, and strong vibration
Complete plug-and-play system, sensor + preamplifier perfectly matched
Multiple protections, ensuring more stable system operation

Non-contact and wear-free, longer lifespan
No contact with the rotating shaft, no mechanical wear, significantly reducing maintenance costs and replacement frequency.
Real-time monitoring, early fault warning
Precisely capture abnormal vibrations and displacements, effectively avoiding major accidents such as shaft seizing, shaft breakage, and bearing burnout.
Adapt to harsh working conditions
Resistant to high temperatures, oil contamination, and interference, operating stably in high-temperature, high-humidity, and dusty environments.
Simple installation, strong versatility
Standard structure, can be directly replaced with sensors of the same specification, suitable for both domestic and international mainstream units.
Enhance equipment reliability
Provide reliable data support for the safe operation of the unit, planned maintenance, and extended lifespan.

How To Cooperate With Us?

Our address

Room 1503, No.96-2 Lujiang Road, Siming District, Xiamen,China.

Phone Number

+86 18050035902

E-mail

info@htechplc.com