ABB

ABB Parts Supplier in China | Original & Obsolete Modules

We supply ABB automation parts for industrial maintenance, system upgrades and equipment replacement, including current and discontinued models. Our available product range includes the ABB 89AR30 GKWN000326R0100 Relay Unit, ABB 88TK05C-E GJR2393200R1220 New Card, NEW ABB 70PR05B-ES HESG332204R1 Module, and ABB GJR5252300R3101 07AC91 AC31 Module.

Contact us with your complete part number and required quantity. We will check availability and confirm the product condition, compatibility information, test documentation and warranty terms applicable to your order. We also provide international shipping quotations based on your destination and order requirements.

Request ABB Stock & Price

Available ABB Parts & Modules

Browse our ABB parts below. If you need a specific model or a discontinued replacement part, send us the part number and quantity so we can check availability and prepare a quotation.

First 12 3 4 5 6 7 Last

Architecture, Electrical Specifications & Hardware Compatibility

ABB automation parts cover multiple generations of industrial control equipment. Compatibility depends on the exact module type, host system, electrical interface, communication bus and installed configuration. A matching brand or similar model designation alone does not establish that a replacement can be installed without further checks.

For ABB AC31 systems, verify the complete order code, configured I/O signal range and CS31 bus arrangement before selecting a replacement. Buyers looking for this series can review our ABB AC31 PLC modules and compare the listed model information with the installed equipment documentation.

For AC 800M installations, check the CPU model, hardware revision, redundancy configuration, supported communication interfaces and controller configuration. If an AC 800M replacement is required, confirm whether a dedicated AC 800M category page is available before linking to it.

When replacing a discontinued module, compare the existing unit's nameplate with the replacement label. Check connector keying, terminal assignment, supply requirements and firmware or hardware revision where applicable. Hot-swapping should only be performed when the exact module and installed system explicitly support the procedure.

ABB Products Specifications

CPUs / Features	AC 800 M PM851	AC 800 M PM891 ABB PLC ABB DCS	AC 800 M PM891 ABB PLC ABB DCS	AC 800 M PM891 ABB PLC ABB DCS	AC 800 M PM891 ABB PLC ABB DCS	AC 800 M PM891 ABB PLC ABB DCS	AC 800 M PM891	AC 800 M PM891
Processor Unit	PM891 ABB PLC ABB DCS	PM891 ABB PLC ABB DCS	PM891 ABB PLC ABB DCS	PM891 ABB PLC ABB DCS	PM891 ABB PLC ABB DCS	PM891 ABB PLC ABB DCS	PM891	PM891
High Integrity Controller	No	No	No	No	No	Yes	No	No
Clock frequency	24 MHz	24 MHz	48 MHz	48 MHz	96 MHz	96 MHz	133MHz	450MHz
Memory (RAM)	8 Mb	8 Mb	8 Mb	16 Mb	32 Mb	32 Mb	64 Mb	256 Mb
CPU redundancy support	No	No	No	Yes	Yes	Yes	Yes	Yes
Switch over time in red. conf.	–	–	–	max 10 ms	max 10 ms	max 10 ms	max 10ms	max 10ms
Ethernet channels	1	2	2	2	2	2	2	2
Performance, 1000 boolean operations (a:=b and c)	0.46 ms	0.46 ms	0.23 ms	0.23 ms	0.15 ms	0.15 ms	0.09 ms	0.043 ms
Comm. modules on CEX bus	1	12	12	12	12	12	12	12
I/O clusters on ModuleBus (local I/O)	1 el. + 1 opt.	1 el. + 7 opt.	1 el. + 7 opt.	1 el. + 7 opt.	1 el. + 7 opt.	1 el. + 7 opt.	1 el. + 7 opt.	0 el. + 7 opt.
I/O capacity on ModuleBus (local I/O) (Non redundant confi guration only)	max 24 I/O modules	max 96 I/O modules	max 96 I/O modules	max 96 I/O modules	max 96 I/O modules	Limited, see user manual for details	max 96 I/O modules	max 84 I/O modules

Supported Communication modules	Profibus	Foundation Fieldbus	RS-232 C	MB300	INSUM
Module	CI854A	CI860	CI853	CI855	CI857
Protocol	DP-V1 (PA via Linking Device)	HSE (H1 via Linking Device)	Modbus master, Comli master/slave, Siemens master, User defi ned protocols	MB300	IEEE 802.3
Master or slave	Master	Master	Master/slave	Master/slave	Master
Number of channels	1	1	2	2	1

Supported Communication modules	ModbusTCP	IEC 61850	AF100
Module	C1867	C1868	C1869
Protocol	Modbus TCP	IEC61850	AF100 Data set
Master or slave	Master/slave	Master	Master/slave
Number of channels	2	1	2

Additional Verification Item	What to Confirm
Full Part Number	Complete ABB order code
Hardware Revision	Revision of the offered unit
Firmware Compatibility	Compatibility with the installed AC 800M system
Product Condition	New sealed, open-box, refurbished or tested surplus
Test Documentation	Available inspection records for the supplied unit
Warranty	Warranty period confirmed in the quotation

Quality Assurance, Electrical Load Testing & Anti-Counterfeit Verification

ABB 89AR30 GKWN000326R0100 Relay Unit

We check ABB part numbers, product labels, hardware revisions and physical condition as part of our order verification process. For PLC modules, relay units and communication boards, the checks depend on the product type and the inspection requirements of each order.

Where functional testing has been performed, we can confirm the applicable test scope and provide available test records. Buyers requiring specific verification, such as power-up checks, I/O function checks or communication tests, should confirm these requirements with us before placing an order.

For discontinued ABB parts, we also recommend checking the complete part number and revision against the existing control system before replacement. Product labels, identification details and supporting documentation can help with verification, but no single check should be treated as conclusive proof of authenticity.

Before ordering, contact us to confirm the product condition, available inspection records and warranty terms for the specific ABB part you need.

Contact our team for part verification

New Original Sealed in Box vs. Refurbished and Tested Surplus

Purchase Condition	Verification Points
New Original Sealed in Box (NOSB)	Packaging and seal condition, label consistency and available provenance records
New, Open-Box or Unused Stock	Packaging status, visible condition and evidence of previous installation
Refurbished and Tested	Refurbishment disclosure, inspection scope, test results and warranty terms
Tested Surplus	Known usage status, actual tests performed and any disclosed limitations

Packaging and labels can support an authenticity review, but neither a sealed box nor a matching label independently proves provenance.
Before installing a replacement CPU, communication card or I/O module, verify the supply voltage, connector assignment, hardware revision and approved installation procedure. If compatibility has not been confirmed, submit an ABB module compatibility check request with the existing part number, installed system model and available revision details.

What We're Offering?

We stock thousands of automation and control components from leading OEMs, all accessible to you from a single place. lf it's not in stock,our multilingual team will scour the globe to find you the part you need for the best price.

FAQ

Q: How can I confirm whether an ABB part is compatible with my existing system?

A: Send us the complete part number, hardware revision if available, and the model of the installed PLC or control system. We can check the available product information and help identify compatibility points that need confirmation before ordering. For older systems, firmware versions and communication interfaces may also affect replacement suitability.

Q: Can you supply discontinued ABB PLC and DCS parts?

A: We handle inquiries for current and discontinued ABB automation parts. Availability varies by model and stock condition. Send us the exact part number and quantity so we can check sourcing options and provide a quotation.

Q: Do you provide test reports and warranty for ABB spare parts?

A: Available test records and warranty terms depend on the specific part and order. We will confirm which inspection information and warranty coverage apply to your requested item before you place the order.

Q: What information should I provide for an urgent ABB AC31 07AC91 replacement?

A: Please provide the full part number GJR5252300R3101, the required quantity, the equipment or system in which the module is installed, and your delivery destination. If available, include a photo of the existing module label. We will check availability and advise on the applicable replacement details and shipping options.

Q: Are these items new and origin?

A: New and Original Package.

Q: Which payment terms we can do?

A: 100%T/T for stock items before shipping.
30%T/T advance and 70% balance against before shipping for indent.

Q: When shall we deliver?

A: Spot products are usually shipped within 2-3 days.
and ordered products are delivered according to the cycle,we have a complete logistics system and will deliver the order as quickly as possible.

Request a Quote for ABB Automation Parts

Need an ABB PLC module, relay unit, communication board or discontinued control-system component? Send us your part number and quantity. We will check availability, confirm the product condition and applicable warranty terms, and provide a quotation with available shipping options.

Request ABB Stock & Price

As one of the leading ABB products manufacturers and suppliers in China, we warmly welcome you to buy discount ABB products from our company. Contact us for more cheap products.