VM-SS180 Speed Sensor

VM-SS180 is a rugged speed sensor for low-speed machines such as hydro turbines and steam turbines. It can work stably in hot, humid, corrosive, and potentially explosive environments, and can be installed in any direction. It is well adapted to measurements under a variety of harsh working conditions.

The VM SS180 Speed Sensor is an electronic sensor used for accurately measuring the rotational speed of rotating machinery, vehicle wheels, transmission shafts, or other driving components. The speed sensor is an indispensable key component in industrial automation, mechanical control, automotive electronics, robotics, and motion systems. It outputs voltage/pulse signals based on the signal changes generated by the rotation of the target shaft, thereby providing real-time, continuous speed feedback and enabling automatic control, monitoring, and protection functions.

VM-SS180 Speed Sensor

 

The Typical Applications Of The VM SS180 Speed Sensor Include:

√Vehicle speed monitoring and control (such as speedometer, ABS braking system)
√Motor, fan, and pump type mechanical speed feedback
√Closed-loop operation monitoring in the motion control system
√Speed input acquisition in PLC and DCS systems

 

Mechanical parameters:
√ Installation method: Bolt fixation or plug clip type
√ Probe type: Compact type without gears or with gears that can directly mesh for measurement.
√ Mechanical interface: Optional standard threads such as M8/M10
√ Environmental protection grade: IP67 / IP68 (waterproof and dustproof)
√ Working temperature range: -40°C to +125°C (suitable for industrial sites and outdoor environments)Mechanical parameters
√ Installation method: Bolt fixation or plug clip type
√ Probe type: Compact type without gears or with gears that can directly mesh for measurement.
√ Mechanical interface: Optional standard threads such as M8/M10
√ Environmental protection grade: IP67 / IP68 (waterproof and dustproof)
√ Working temperature range: -40°C to +125°C (suitable for industrial sites and outdoor environments)

Accelerometers:
CA Series: This is a high-temperature, piezoelectric-based accelerometer suitable for long-term measurement and monitoring of absolute vibration in the harshest environments, and can measure temperatures up to 700°C. The low-level pc/g output of the sensor can be converted to a current or voltage signal suitable for transmission to the monitoring system using an external signal conditioner.
CE Series: This is also a piezoelectric-based accelerometer. Depending on the application temperature, it can be divided into types with additional electronic components for higher temperature applications (up to 350°C) or with integrated electronic components for lower temperature applications (up to 120°C). It has excellent low-frequency response, as low as 0.2Hz, and is suitable for vibration monitoring of equipment such as gas turbines.
SE Series: It is also an accelerometer with integrated electronic components. The low-frequency response can be as low as 0.2Hz, which is suitable for vibration monitoring of a variety of equipment.

Speed ​​Sensors:
CV21X Series: is a moving coil speed sensor with the advantages of self-power and a strong output signal in native speed units (mm/s), so the signal-to-noise ratio is excellent, no integration is required, and it is suitable for long-term measurement and monitoring of low-frequency absolute vibrations such as turbines or fans.
VE210 Series: Designed for long-term measurement of vibrations in harsh environments, such as low-speed machines such as hydroelectric turbines and steam turbines, with very low frequency response, down to 0.5Hz, temperature range of -25 to 80°C, and can provide current output (50µA/mm/s) for long-distance signal transmission or voltage output (50mV/mm/s) for medium-distance signal transmission, and no restrictions on mounting direction.

Proximity Sensors：
TQ Series: is a rugged sensor that uses the eddy current principle to perform non-contact measurements of relative vibration, position, etc. in harsh environments. It has a measurement range from 2 to 12mm and can withstand pressures up to 100bar. It is suitable for a variety ofapplicationss from speed and vibration to large displacement expansion measurements.

Dynamic Pressure Sensors
CP Series: are high temperaturpiezoelectric-basedsed pressure sensors designed for long term measurement and monitoring of combustor pulsations and combustion dynamics in gas turbines.

Welcome to inquiry!

Ms.Smiling Sales Manager┃CHINA

Mobile/WhatsApp/Wechat:+86 18050035902

E-mail: info@htechplc.com

Website: https://www.joyoungintl.com/