244-704-000-042 A1-B03-C100-D77-E10-F500-G0-H0-I0 In Stock

 

Parameter	Description
Product Model	244-704-000-042 A1-B03-C100-D77-E10-F500-G0-H0-I0
Series	IPC704
Input Type	Piezoelectric charge input (CA / CP sensors)
Output Signal	Current output (2-wire) or Voltage output (3-wire)
Supply Voltage	18–30 V DC
Power Consumption	≤ 25 mA
Frequency Range	Approx. 0.5 Hz – 20 kHz (configurable)
Filter Function	High-pass & low-pass adjustable filters
Operating Temperature	-30°C to +85°C
Housing	Industrial-grade aluminum enclosure
Protection Class	IP40 (typical configuration)
Signal Transmission Distance	Up to 1 km (depending on configuration)
Origin	Switzerland
HS code	9032900090

 

 

In industrial automation systems, the IPC704 Signal Conditioner not only performs signal conversion, but more importantly, ensures that the signals collected on-site can meet the input requirements of the control system and monitoring system. For equipment that has already been put into operation, most users will require the purchase of a model that is exactly the same as the original equipment to avoid the need to modify the program, rewire, or adjust system parameters.

 

We have been supplying the IPC704 Signal Conditioner model 244-704-000-042 A1-B03-C100-D77-E10-F500-G0-H0-I0 for a long time. We offer complete model verification services. We can assist in confirming the model based on product labels, equipment lists (BOM), historical purchase records, or on-site photos, thereby reducing the procurement risks caused by incorrect model identification. At the same time, we can provide product photos, packaging photos, and pre-shipping appearance inspections according to customer requirements. This is convenient for project procurement, end-user acceptance CE, and overseas equipment maintenance.

 

For overseas projects, we support international logistics methods such as DHL, FedEx, and UPS. We can arrange commercial invoices, packing lists, and export documents according to customer requirements, providing supply support for equipment maintenance shutdowns, annual spare parts purchases, and long-term inventory planning.

 

Two versions of the IPC704 signal conditioner are available:

» An IPC704 for sensors using standard piezoelectric materials, for example, CAxxx, CP10x, and CP2xx (ordering number 244-704-000-042-...).

» An IPC704 for sensors using GaPO4 piezoelectric material, for example, CP50x (ordering number 244-704-000-511-...).

 

Charge amplifier frequencies versus transfer unit

IPC704 for accelerometers (acceleration output) using standard piezoelectric materials

Ordering number 244-704-000-042-... with ordering options B01 and B02

 

For operation in different regions of the chart, the cutoff frequency of the IPC704's charge amplifier dictates the required high-pass filter settings. (See the HP FILTER (E) option in ordering information.)

Region 1: Cutoff frequency is 0.5 Hz → HP filter ≥ 0.5 Hz.

Region 2: Cutoff frequency is 1 Hz → HP filter ≥ 1 Hz.

Region 3: Cutoff frequency is 2 Hz → HP filter ≥ 2 Hz.

Region 4: Cutoff frequency is 3 Hz → HP filter ≥ 5 Hz

 

 

Input signal type: Piezoelectric charge input

244-704-000-042 A1-B03-C100-D77-E10-F500-G0-H0-I0 This device adopts a piezoelectric charge input method, which can be connected to CA series acceleration sensors and CP series dynamic pressure sensors. It can process the vibration and dynamic pressure signals generated by rotating equipment. Compared with directly collecting weak charge signals, the output after signal conditioning is better suited for collection and analysis by industrial control systems and can reduce the influence of external interference during long-distance transmission on the measurement results.

 

 

Output signal: Standard analog current/voltage output

Based on the specific configuration code, standard analog current output (2-wire system) or voltage output (3-wire system) is provided. It can be directly connected to PLC, DCS, SCADA, and mechanical protection systems. The standardized output method is compatible with most industrial control devices. During equipment renovation, spare parts replacement,t and system expansion, no additional signal conversion units need to be added, which helps maintain the consistency of the on-site wiring method.

 

Frequency range: approximately 0.5 Hz to 20 kHz

The IPC704 series supports a working frequency range of approximately 0.5 Hz to 20 kHz. Different configuration codes correspond to different filtering and measurement parameters, covering requirements from low-frequency mechanical vibrations to high-frequency dynamic signals. Combined with the factory-set high-pass and low-pass filtering parameters, it can meet the state monitoring and fault diagnosis applications for rotating equipment such as steam turbines, gas turbines, compressors, centrifugal pumps, and fans. It has good applicability for typical fault signals such as bearing wear, rotor imbalance, and mechanical loosening. Therefore, during the purchasing process, it is recommended to confirm the complete model and configuration code to ensure that the input type, output form, and frequency parameters are consistent with the on-site equipment.

 

 

 

The IPC704 series adopts a modular configuration approach. Different configuration codes represent different input ranges, output forms, filtering parameters, and electrical specifications. Therefore, merely confirming "IPC704" or "244-704-000-042" is often not sufficient to meet the on-site replacement requirements.

 

When purchasing item 244-704-000-042 A1-B03-C100-D77-E10-F500-G0-H0-I0, it is recommended to carefully confirm the following information:

Product complete order model
Whether the configuration code is consistent
Input sensor type
Output signal type
Power supply requirements for operation: Installation method
Use of the system model
Is it the original on-site replacement model?

Providing the above information is helpful in confirming the product configuration and improving the accuracy of procurement.