Product Introduction
The IPC704 signal conditioner converts the chargebased signal from a piezoelectric-based transducer into a current or a voltage signal. This current or voltage signal is transmitted to the processing electronics via a standard 2-wire or 3-wire transmission cable.
Technical Specifications
|
Model |
IPC704 |
|
PN Number |
244-704-000-042 |
|
Description |
Signal conditioner |
|
Origin |
Switzerland |
|
Dimension |
15*14*5cm |
|
Weight |
0.35kg |
Product Details
FEATURES：
» From the Vibro-Meter® product line
» For CAxxx piezoelectric accelerometers and CPxxx dynamic pressure sensors
» Configurable high-pass and low-pass filters
» Frequency range: 0.5 Hz to 20 kHz
» Optional integrator to produce a velocity output
» Optional 2-wire current or 3-wire voltage transmission
» Certified for use in potentially explosive atmospheres
» A range of installation options are available
The current modulation technique allows transmission over a distance of up to 1 km. A GSI galvanic separation unit is required for this configuration.
Power supply to IPC704：
Voltage 18 to 30 VDC
Current 25 mA (max.)
Signal conditioner without industrial housing (ordering option G0)：
HOT PRODUCTS
| IS220PSCHH1A |
| IS220PAICH1B |
| IS220PDIAH1A |
| IS220PTURH1A |
| IS220PRTDH1B |
| IS220YSILS1B |
| IS220PVIBH1A |
| IS220PPRFH1A |
| IS220PDOAH1B |
| IS220PPROS1B |
| IS220PTCCH1B |
| IS220PDIOH1B |
| IS215ACLEH1CA |
| DS200DSPCH1ADA |
| IS200EXHSG3AEC |
| DS200SDC1G1AGB |