200-560-000-019 I/O CARD IOC4T

The 200-560-000-019 IOC4T contains four local relays that can be attributed to any specific alarm signals under software control. For example, these may be used to signal an MPC4 fault or a problem detected by a common alarm (Sensor OK, Alarm and Danger) in a typical application.

When used as a card pair with an MPC4 machinery protection card, the IOC4T is highly suitable for machinery monitoring and protection in a wide range of industrial applications.

For further information on the use of MPC4/IOC4T card pairs in general, refer to the VM600 machinery protection system (MPS) hardware manual and the VM600 MPSx software manuals.

For information on the use of MPC4/IOC4T card pairs in functional safety contexts, refer to the refer to the VM600 functional safety manual. For specific applications, contact your local Meggitt representative.

SPECIFICATIONS：

Dynamic signal inputs

Filtering：Filtered for protection against electromagnetic interference (conforms to EC standards). Refer to the VM600 MPC4 machinery protection card data sheet for further information.

Buffered dynamic signal outputs

Filtering：Filtered for protection against electromagnetic interference (conforms to EC standards). Refer to the VM600 MPC4 machinery protection card data sheet for further information.