200-582-993-022 Rack Power Backplane

200-582-993-022 is the power backplane/back panel component for the VM600 / VM600 Mk2 rack system. This component mainly appears in the rack power connection part of the VM600 system, serving as part of the backplane connection interface, achieving the functions of power input and power distribution, and signal routing for all modules within the rack. According to the official backplane numbering method, 200-582-993-022 belongs to the "Associated Rear Panel" (related power rear panel) of the DC input version with tC two-DC-power-port configuration.

The power input on the back of the 200-582-993-022VM600 system rack (such as ABE04x) is connected to the backplane and is used to connect an external DC power supply and distribute it to the RPS6U power module, VME bus, and other system modules.

DC version (ordering number (PNR): 200-582-993-NHh)

This version has two screw-terminal connectors for the DC power inputs, and individual inputs on each RPS6U. The wiring assembly for the rear panel includes the additional cabling (....... ) only when at least the first RPS6U rack power supply (PS1) is an AC-input version operating with a DC input (which requires a rear panel with a DC input).

The main function of this backplate / rear panel is:
✅ As the external power DC input port
➡ Equipped with two DC input interfaces (for two RPS6U DC power units)
➡ Supports redundant power input, enabling the system to continue operating even in the event of a power failure.

200-582-993-022 The back panel is usually used for:
➡ The power input rear panel of the RPS6U power unit
➡ Power shielding, distribution, and bus interface connection points

Typically, a standard rack includes at least:
RPS6U power unit (×1 or ×2)
200-582-993-022 Power Supply Back Panel
VM600 monitoring module (such as MPC4/IOC4T)
CPU control module (CpuUx / IOCRx)
Relay / I/O Expansion Module
The back panel connects the above modules electrically and signals them, and provides a unified power distribution (for the CPU, I/O, and monitoring cards).

 

 

VM600 system & Rack Backplane

01.

What is the VM600 system?

The VM600 and VM600Mk2 systems are specifically designed for industrial rotating machinery (such as steam turbines, compressors, generators, etc.):
Mechanical Protection System (MPS)
Condition Monitoring System (CMS)

This system consists of multiple modules: power module, CPU module, I/O module, monitoring module, relay module, communication module, etc. It is installed in a 19-inch standard rack (referred to as ABE04x series).

 

02.

System structure illustration

External Power Source
│
Rear Panel (200-582-993-022)
│
VM600 Rack Backplane
├─ RPS6U Power Supply x1/2
├─ CPU Controller Module
├─ Monitoring Modules (MPC4/IOC4)
├─ I/O Modules
└─ Relay & Communication Cards

The back panel not only serves as the power distribution center, but also undertakes the bus and signal connections for the internal modules of the rack.