IC695CPU320 PACSystems* RX3i CPU

IC695CPU320 PACSystems* RX3i CPU can be used to perform real-time control of machines, processes, and material handling systems. The CPU communicates with the programmer and HMI devices via a serial port using SNP Slave protocol. It communicates with I/O and smart option modules over a dual backplane bus that provides:

▪ High-speed PCI backplane for fast throughput of new advanced I/O.

▪ Serial backplane for easy migration of existing Series 90*-30 I/O.

IC695CPU320 Features：

▪ Contains 64 Mbytes of battery-backed user memory and 64 Mbytes of non-volatile flash user memory.

▪ Provides access to bulk memory via reference table %W.

▪ Configurable data and program memory.

▪ Programming in Ladder Diagram, Structured Text, Function Block Diagram, and C. Refer to PACSystems RX7i & RX3i CPU Programmer's Reference Manual, GFK-2950.

▪ Supports auto-located Symbolic Variables that can use any amount of user memory.

▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for analog %AI and %AQ.

▪ Supports most Series 90-30 modules and expansion racks. For a list of supported I/O, Communications, Motion, and Intelligent modules, refer to the PACSystems RX3i System Manual, GFK-2314F or later.

▪ Supports up to 512 program blocks. The maximum block size is 128KB.

▪ CPU firmware may be upgraded in the field.

▪ CPU supports firmware upgrades of modules in its backplane.

▪ Two serial ports: an RS-485 serial port and an RS-232 serial port.

▪ Ethernet communications via the rack-based Ethernet Interface module (IC695ETM001). For details on Ethernet capabilities, refer to PACSystems RX7i & RX3i TCP/IP Ethernet Communications User Manual, GFK-2224.

▪ Time Synchronization to the SNTP Time Server on an Ethernet network when used with Ethernet Release 5.0 or later.

▪ Compliant with EU RoHS Directive 2002/95/EC using the following exemptions identified in the Annex: 7(a), 7(c)-I, & 7(c)-III.

Installation Location：

This product is intended for use with the RX3i system. Its components are considered open equipment (having live electrical parts that may be accessible to users) and must be installed in an ultimate enclosure that is manufactured to provide safety. At a minimum, the enclosure shall provide a degree of protection against solid objects as small as 12mm (e.g., fingers). This equates to a NEMA/UL Type 1 enclosure or an IEC60529 IP20 rating, providing at least a pollution degree 2 environment. For details about installing RX3i rack systems.

Ordering Information：

Release History: