Description
Technical Parameters
Product Introduction
The UCVF is a double-slot board using an 850 MHz Intel Pentium® III processor with 16 or 128 MB of flash memory and 32 MB of DRAM. Two 10BaseT/100BaseTX (RJ-45 connector) Ethernet ports provide connectivity. The first Ethernet port allows connectivity to the UDH for configuration and peer-to-peer communication.
Technical Specifications
|
Manufacture |
General Electric(GE) |
|
Model |
IS215UCVFH2A |
| Part Number | IS215UCVFH2A |
|
Description |
Mark VI Controller
|
|
Origin |
USA |
|
Dimension |
30*20*6cm |
|
Weight |
0.35kg |
Product Details
The second Ethernet port is for use on a separate IP logical subnet. This Ethernet port is configured through the toolbox. The controller validates its toolbox configuration against the existing hardware each time the rack is powered up.Note A separate subnet address allows the controller to uniquely identify an Ethernet
port. IP subnet addresses are obtained from the Ethernet network administrator (for
example, 192.168.1.0, 192.168.2.0).
IS215UCVFH2A features:
Control capability: It uses a powerful processor for real-time control and can handle complex control algorithms, suitable for various industrial automation and control systems.
I/O capacity: The dual-sided design achieves high I/O density, which can meet the needs of efficient system integration and facilitate system expansion and connection of multiple devices.
Communication function: It supports multiple communication protocols such as Ethernet, serial and fieldbus, which facilitates data interaction and communication with other devices and systems.
Environmental adaptability: The rugged design can adapt to harsh industrial environments and ensure operation in various industrial scenarios.
Control capability: It uses a powerful processor for real-time control and can handle complex control algorithms, suitable for various industrial automation and control systems.
I/O capacity: The dual-sided design achieves high I/O density, which can meet the needs of efficient system integration and facilitate system expansion and connection of multiple devices.
Communication function: It supports multiple communication protocols such as Ethernet, serial and fieldbus, which facilitates data interaction and communication with other devices and systems.
Environmental adaptability: The rugged design can adapt to harsh industrial environments and ensure operation in various industrial scenarios.
Technical parameters：
Processor: It is a high-performance processor that meets the needs of real-time control.
Communication interface: It has an Ethernet interface and supports 10BaseT or higher speed network connection. It may also be equipped with a serial interface, etc.
Power supply: DC power supply is usually used. The specific voltage and current requirements need to be determined according to the actual application.
Installation method: It supports rack installation, which is convenient for installation and layout in industrial control cabinets or equipment.
Processor: It is a high-performance processor that meets the needs of real-time control.
Communication interface: It has an Ethernet interface and supports 10BaseT or higher speed network connection. It may also be equipped with a serial interface, etc.
Power supply: DC power supply is usually used. The specific voltage and current requirements need to be determined according to the actual application.
Installation method: It supports rack installation, which is convenient for installation and layout in industrial control cabinets or equipment.
RELATED PRODUCTS
| IS200TRPGH1B Primary Trip Terminal Board, GAS |
| IS200TRPGH2B TERM BD TRIP PRIMARY |
| IS200TRPGH3B TERM. BD., TRIP PRIMARY |
| IS200TRPGS1B MKVIES, TRIP PRIMARY GAS, SIL |
| IS200TRPLH1A TB, TURBINE PRIMARY TRIP, LARGE STEAM |
| IS200TRPSH1A TERM BD TRIP PRIMARY |
| IS200TRTDH1A MKVI, RTD Terminal Board |
| IS200TRTDH1B MKVI, RTD Terminal Board |
| IS200TRTDH1C RTD TERMINATION BOARD |
| IS200TRTDH1D MARK VI, RTD TERMIN CARD (*2) |
| IS200TRTDH2D TERM. BD., RTD |
| IS200TSVAH1A MKVI, Servo Terminal Board |
| IS200TSVCH1A SERVO TERMINAL BOARD |
| IS200TSVCH2A SERVO TERMINAL BOARD |
| IS200TSVOH1A MKVI, Servo Terminal Board |
| IS200TSVOH1B MKVI, Servo Terminal Board |
| IS200TSVOH2B MKVI, Servo Terminal Board |