IC660BBA025 Electrical Characteristics
Power Supply Voltage: The supply voltage range is 18-56VDC, with a maximum ripple of 10% and a minimum power interruption time of 10ms.
Output Signal: 6 output channels with 4-20mA output signals. Outputs 5 and 6 can also be used for voltage applications.
Isolation: Module-to-module isolation is 1500V for 1 minute.
Features:
Software Configuration: Software configurable, with features such as output hold or default state, circuit scaling to engineering units, output feedback checks, and feedback time.
Diagnostics: Advanced diagnostics automatically perform diagnostic checks such as output overrange and underrange, output feedback, and CPU/internal fault reporting. Fault reporting can be enabled or disabled on a circuit-by-circuit basis.
Power Supply: Powers all circuits; no separate power supply is required for the 4-20mA signal.
Block Groups for Copying Configuration：
The block being copied from (the source block) and the target block must be of the same type. Within each group shown below, any block may be used as the target block or the source block. If the target block has more features than the source block, these can be individually configured later. If the target block has fewer features than the source block, the extra features are not copied.
115 VAC 8 Circuit Grouped Block (IC660CBD100)
115 VAC Low–leakage 8 Circuit Grouped Block (IC660BBD101)
115VAC/125VDC Isolated I/O Block (IC660CBS100)*
115VAC/125VDC Isolated I/O Block (IC660BBS100 or BBS102)
115VAC/125VDC Isolated I/O Block, w/o Failed Switch (IC660BBS101 or BBS103)
24/48 VDC 16 Circuit Source I/O Block (IC660CBD020)*
24/48 VDC 16 Circuit Source I/O Block (IC660BBD020)
24/48 VDC 16 Circuit Sink I/O Block (IC660CBD021)*
24/48 VDC 16 Circuit Sink I/O Block (IC660BBD021)
24 VDC 16 Circuit Source I/O Block (IC660BBD022)
24 VDC 16 Circuit Sink I/O Block (IC660BBD023)
115 VAC 16 Circuit Input Block (IC660BBD110
16 Circuit Relay Block, Normally–Closed (IC660BBR100)
16 Circuit Relay Block, Normally–Open (IC660BBR101)
12/24 VDC 32 Circuit Source I/O Block (IC660BBD024)
5/12/24 VDC 32 Circuit Sink I/O Block (IC660BBD025)
24/48 VDC 4 Input/2 Output Analog Block (IC660CBA020)*
24/48 VDC 4 Input/2 Output Analog Block (IC660BBA020)
115 VAC 4 Input/2 Output Analog Block (IC660CBA100)*
115 VAC 4 Input/2 Output Analog Block (IC660BBA100)
115VAC/125VDC Current–source Analog Block (IC660BBA104)
24/48VDC Current–source Analog Block (IC660BBA024)
115VAC/125VDC Current–source Output Block (IC660BBA105)
24/48VDC Current–source Output Block (IC660BBA025)
115VAC/125VDC Current–source Input Block (IC660BBA106)
24/48VDC Current–source Input Block (IC660BBA026)
24/48 VDC RTD Input Block (IC660BBA021)
115 VAC RTD Input Block (IC660BBA101)
24/48VDC Thermocouple Input Block (IC660BBA023)
115VAC/125VDC Thermocouple Input Block (IC660BBA103)
