Product Introduction
IC698CPE040 is the central processing unit (CPU) of PACSystems' RX7i series programmable automation controllers (PAC). It adopts a Pentium-level processor and is one of the core modules of the GE Fanuc 90-30 series programmable logic controller (PLC), which is designed to control various automated equipment and processes.
Technical Specifications
|
Manufacture |
GE |
|
Model |
IC698CPE040 |
| Part Number | IC698CPE040 |
|
Description |
CPU Module |
|
Origin |
USA |
|
Dimension |
30*25*5cm |
|
Weight |
0.55kg |
Product Details
IC698CPE040 Hardware installation and configuration
Rack: It must be installed on an RX7i series rack, such as IC698CHS017 (17 slots), etc.
Power supply: An independent RX7i power module (such as IC698PSA350) is required to power the entire rack.
IC698CPE040 Features
▪ Contains 64 Mbytes each of battery-backed user memory and non-volatile flash user memory for user data (program, configuration, register data, and symbolic variable) storage.
▪ Access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, C, Structured Text, and Function Block Diagram.
▪ Auto-located Symbolic Variables that can use any amount of user memory.
▪ Support for Series 90-70 discrete and analog I/O, communications, and other modules.
▪ Support for all VME modules supported by Series 90-70.
▪ Rx7i data monitoring over the web. Allows a combined total of up to 16 web server and FTP connections.
▪ Up to 512 program blocks. The maximum size for a block is 128KB.
▪ Test Edit mode that allows you to easily test modifications to a running program.
▪ Bit-in-word referencing.
▪ Battery-backed calendar clock.
Application field
The GE FANUC IC698CPE040 CPU module is used in various industrial automation fields, including but not limited to the following applications:
Manufacturing automation: such as assembly lines, packaging systems, robot control, etc.
Process control: such as in the petrochemical, food processing, pharmaceutical, and other industries.
The compatibility of IC698CPE040 with the GE 90-70 series
Contact: info@htechplc.com
For applications involving distributed control systems (DCS) or monitoring and data acquisition systems (SCADA), the IC698CPE040 needs to be able to integrate well with these external systems. For example, if data exchange with the SCADA system is required, it is necessary to ensure that the corresponding communication protocols (such as Modbus, Ethernet/IP, OPC, etc.) are supported. If there are HMI devices for operation and monitoring in the system, the IC698CPE040 needs to be compatible with the HMI devices, typically through Ethernet or serial communication for data exchange. The purchaser needs to check whether the product supports mainstream HMI platforms, such as GE Proficy, Wonderware, Siemens WinCC, etc.
