AS-B804-116 Modicon Output Module 115VAC

The AS-B804-116 is an output module used in Modicon series programmable logic controller (PLC) systems. It is mainly used to convert PLC control logic signals into multiple 115 VAC AC output signals, thereby driving on-site execution devices. This module is suitable for centralized control and management of AC loads in industrial automation control systems, featuring a mature structure and stable application.

The AS-B804-116 Output Module is equipped with multiple AC discrete output channels to establish a reliable control interface between the PLC control system and the on-site AC execution equipment. Each output channel exists as an independent control unit, and its on-off state is directly determined by the controller program, thereby achieving precise control of external loads.

1. Channel independence

Each output channel within the AS-B804-116 Output Module can be addressed and controlled independently, and the channels are logically independent of each other. The control system can start and stop any single channel according to the process requirements without affecting the working status of other output points. This design is suitable for application scenarios where multiple devices are controlled in parallel or in segments.

2. AC load adaptation feature

The output channel is specifically designed for 115 VAC AC loads and is suitable for controlling relays, contactor coils, indicator lights, and other common AC actuators. The electrical characteristics of the channel during on-off switching are matched with the AC power supply cycle, which helps the load maintain a smooth state during start-up and shutdown.

3. Grouped output structure

The output channels are grouped and managed within the module according to certain rules. Output channels within the same group usually share common loop conditions. This grouping structure is conducive to centralized power supply and unified management of loads in system design. The rational utilization of the group structure can simplify on-site wiring while meeting the control requirements and reduce the complexity of wiring.

4. Current carrying and distribution characteristics

AS-B804-116 Output Module. Each output channel can continuously output alternating current, making it suitable for driving common industrial control loads. The overall output capacity of the module is limited by the total current. When multiple channels are working simultaneously, it is necessary to rationally allocate the load of each channel. By controlling the load current in a single channel and within a group, the module can be kept in a stable working state for a long time.

5. Stability of on-off state

When the output channel is on, the AS-B804-116 Output Module can provide stable AC output conditions for the load. In the closed state, the channel remains open, and the residual current is controlled at a low level. This feature helps to reduce unexpected impacts on external devices and is suitable for control scenarios where there are clear requirements for disconnection status.

6. Transient adaptability

The output channel was designed with consideration taken into account the common transient current variations in industrial sites, such as the instantaneous impact generated when inductive loads are started or disconnected. Under reasonable usage conditions, the module can adapt to short-term current changes, which helps to improve the adaptability of the output channel in complex load environments.

7. Channel isolation design

The output channel and the control logic circuit adopt an electrical isolation structure, keeping the on-site AC circuit relatively independent from the PLC control system. This isolation method helps to reduce the transmission of external interference to the control system, enhancing the overall system's anti-interference capability and operational reliability.

8. Applicable control mode

The output channel is suitable for two typical modes: periodic action control and continuous operation control. It can be used for equipment start-stop control, status indication control, and action drive of process execution equipment. Through the reasonable configuration of program logic, various industrial control requirements can be met.

If you have any order needs, please contact us