Product Introduction
NTMP01 6638918J1 is a multi-function processor terminal unit (Termination Unit) produced by ABB, belonging to the Bailey Infi90 series. It is mainly used in industrial automation control systems to terminate multi-function processors, INFI-NET® to computer transmission modules or INFI-NET to INFI-NET transmission.
Technical Specifications
|
Brand |
ABB Bailey |
|
Model |
NTMP01 |
|
Part Number |
6638918J1 |
|
Description |
Multi-Function Processor Termination Unit |
|
Origin |
USA |
|
Dimension |
25*25*6cm |
|
Weight |
0.55kg |
Product Details
FEATURES
The TMP termination unit has two jumper configurable RS-232-C ports for DCE, DTE, nonhandshake or loopback operation. These ports allow the MFP module to communicate with computers and terminals. The termination unit also provides two serial communication links for analog control stations (SAC) and digital control stations (DCS) through the NTCS04 Control Station Termination Unit. When both ports are configured as RS-232-C ports, the TMP termination unit provides isolation between INFI 90 and the connected equipment (the RS-485 port is not isolated).
The TMP termination unit has two LEDs. The LEDs identify which MFP module (primary or redundant) is the active module. This indication is useful for troubleshooting and maintenance.
SPECIFICATIONS
| Property | Characteristic/Value |
| Communication | Two RS-232-C serial ports or one RS-232-C port and one RS-485 port. One control station serial link. |
|
Cable Insulation: PVC (UL Rating CL2) Non PVC (UL Rating PLTC) |
80°C (176°F) at 300 V 90°C (194°F) at 300 V |
| Mounting | Screw mounts on the field termination panel. |
|
Environmental: Electromagnetic/Radio Frequency Interference Cooling Requirements Operating Temperature Relative Humidity Altitude Air Quality |
Values not available at this time. Keep cabinet doors closed. Do not use communication equipment any closer than 2 meters from cabinet. No cooling necessary when used in Bailey cabinets and operated within environmental limits. 0° - 70°C (32° - 158°F) 5% - 90% up to 70°C (158°F) (noncondensing) Sea level to 3 km (1.86 mi) Bailey equipment should be operated and stored in a noncorrosive environment. |
| Certification | All termination units are CSA certified as process control equipment for use in an ordinary (nonhazardous) location. |
SPECIAL HANDLING
Observe these steps when handling electronic circuitry:
1. Use Static Shielding Bag. Keep the modules in the static shielding bag until you are ready to install them in the system. Save the bag for future use.
2. Ground Bag Before Opening. Before opening a bag containing an assembly with semiconductors, touch it to the equipment housing or a ground to equalize charges.
3. Avoid Touching Circuitry. Handle assemblies by the edges; avoid touching the circuitry.
4. Avoid Partial Connection of Semiconductor. Verify that all devices connected to the modules are properly grounded before using them.
5. Ground Test Equipment.
6. Use an Antistatic Field Service Vacuum. Remove dust from the module if necessary.
7. Use a Grounded Wrist Strap. Connect the wrist strap to the appropriate grounding plug on the power entry panel. The grounding plug on the power entry panel is connected to the earth grounding electrode system through the AC safety ground.
8. Do Not Use Lead Pencils to Set Dipswitches. To avoid contamination of dipswitch contacts that can result in unnecessary circuit board malfunction, do not use a lead pencil to set a dipswitch.
ABB Bailey Infi 90
ABB Bailey Infi 90 is a classic distributed control system (DCS) widely used in industrial automation with high reliability and advanced control functions.
The Infi 90 was originally launched in 1987.
This was later developed into the INFI 90 Open in 1992. This was followed in 1996 by the launch of Symphony Harmony.
ABB currently offers solutions to upgrade the Infi 90 system to Symphony Plus for more efficient control and optimization.
Welcome to inquiry!
Ms.Smiling Sales Manager┃CHINA
Atten：Smiling
Mobile/WhatsApp/Wechat:+86 18050035902
E-mail: info@htechplc.com
Website: https://www.joyoungintl.com/
Address: Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen,China.