WOODWARD 5437-053 Field Terminal Module
If you need to obtain more detailed product information, please contact info@htechplc.com.
Choose our products
5437-053 Field Terminal Module is used to reliably connect the analog and digital signals from on-site sensors, actuators, and other equipment to the control system. The Field Terminal Module is installed ina standard manner via racks or cabinets (through slots and fixing screws). This model has now been discontinued by the manufacturer, but our company still has in-stock products available.
Field Terminal Module function:
The core function of 5437-053 is not to perform control logic calculations, but to serve as the endpoint and distribution center for physical signals:
Integrate the cable connection points of the on-site sensors/actuators into a single module;
Provide standardized 37-pin connectors to facilitate wiring on the control system side.
Reduce the risk of on-site wiring errors and enhance maintenance convenience.
This module is compatible with a variety of control systems and is commonly used in:
Woodward's digital control system;
DCS (Distributed Control System)
Summary of on-site signals inside the PLC control cabinet;
Used as an intermediate node for I/O wiring.
Technical Specifications
|
Brand |
WOODWARD |
|
Model |
5437-053 |
|
Description |
Field Terminal Module |
| Connector type | 37-PIN |
|
Origin |
USA |
|
Dimension |
10*10*8cm |
|
Weight |
0.25kg |
Installation and wiring method of 5437-053
1. Installation location
It should be installed in the control cabinet near the incoming line end on site, so that the on-site cables are concentratedono the module in the shortest and most orderly manner. The fixing method for the terminal module can be:
Screwed onto the back panel of the control cabinet; The DIN rails are installed in the cabinet by clamping (depending on the specific structure of the accessories).
2. Cabling and Wiring Recommendations
On-site cable connection suggestions:
The on-site side cables are labeled according to the functions of sensors/actuators.
Insert the complete cable bundle into the module using the 37-pin connector.
On the control system side, connect the DCS/PLC host with neat wiring harnesses.
After the wiring is completed, mark the terminals with professional labels to indicate their numbers.
Compared with other modules
| Model | Description | Function positioning |
| 5437-051 | Relay Module, 32 Channel | On-site relay module |
| 5437-052 | NetCon FTM | On-site terminal module |
| 5437-053 | NetCon FTM / Field Terminal | |
| 5437-054 | Field Terminal Module | Another terminal module |
| 5437-059 | Chassis | Rack component |
FAQ
Q: Is the manufacturer of WOODWARD still producing the model 5437-053?
A: According to the official information released by WOODWARD, model 5437-053 is no longer in production. Instead, it is a typical MRO spare part. When purchasing, it is recommended to prepare 1-2 spare parts.
Q: When purchasing the 5437-053 Field Terminal Module, which aspects of the product need to be examined?
A: 1. Clear physical photos (nameplate, serial number, seal)
2. Whether it is completely consistent with the I/O points and terminal definitions of the on-site control system
3. Whether it is the same generation of the NetCon / control system interface
4. Whether it is the original factory standard 37-Pin interface
5. Whether the pin arrangement is completely consistent with the on-site wiring harness
Q: Regarding the requirements for the packaging and transportation of goods
A: 1. Anti-static packaging
2 . Terminal protection (against compression and bending)
3.Long-distance transportation moisture-proof treatment