Product Introduction
The Hand Held Programmer (WOODWARD 9907-205) is a hand-held terminal, powered by the ProAct™ Digital Speed Control. The terminal connects to the RS-422 D connector port on the control. Firmly seat the connector on the terminal into J1. Control boxes are equipped with a cover which must be removed to access the J1 receptacle and the two other terminal strips. When power is applied to the terminal by plugging it into the control, it performs a power-up self-test. Upon successful completion of the self-test, the screen will remain blank. Press the ID key to display the part number and revision level of the software in the control. Refer to this number and revision level in any correspondence with Woodward. The programmer screen is a four line, back-lighted LCD display. The display permits the user to look at two separate functions or menu items at the same time. Use the "up/down arrow" key to toggle between the two displayed items. The first letter of the active menu will blink. Changes recorded in the menus may be lost should the ProAct control be powered down. Push the SAVE key to permanently record changes before leaving a menu.
Technical Specifications
|
Brand |
WOODWARD |
|
Model |
9907-205 |
| Part Number | 9907-205 |
|
Description |
Hand Held Programmer |
|
Origin |
USA |
|
Dimension |
30*25*10cm |
|
Weight |
0.52kg |
Product Details
Hand Held Programmer (part number 9907-205) is used to adjust the ProAct control. It plugs into the serial port (J1 connector) of the control.
Generator Load Sensor (part number 9907-026) for load sharing or droopparallel generator applications. This will connect to the Aux input on the control. SPM-A Synchronizer for synchronizing the generator phase to that of the power bus. The synchronizer generates a close-generator-breaker signal to parallel the generator with the power bus. Connect the synchronizer to the Aux input to bias the speed setting.
Functional characteristics:
With synchronization function, it can realize synchronous operation control between multiple devices.
It can detect the load of the public power grid and monitor the load of the power grid in real time.
It can control the import and export load levels and effectively manage the load distribution of the equipment.
It has power factor control function to improve the efficiency of power utilization.
It has the ability to control the main process and centrally control and manage the entire process.