Description
Technical Parameters
Product Introduction
204-042-100-011 ABE042 This rack has a standard height of 6U and is a 19-inch rack. It can accommodate up to 15 single-width VM600Mk2/VM600 modules (rack slots) and is suitable for industrial environments. It can be installed on a 19-inch cabinet or panel. The VM600Mk2/VM600 processing module is installed at the front of the rack, while the related input/output modules are installed at the rear. The input/output modules provide connectors for connecting sensors/measurement chains.
Technical Specifications
|
Model |
ABE042 |
|
PN Number |
204-042-100-011 |
|
Description |
19" Rack
|
|
Origin |
Switzerland / Germany |
|
Dimension |
45*30*30cm |
|
Weight |
2.45kg |
Product Details
These racks are used to house hardware from Vibro Meter's VM 600 series of machinery protection systems and condition monitoring systems. Two rack types are currently available: the ABE 040 and the ABE 042. These are very similar, differing only in the position of the mounting brackets.
Both racks are particularly suitable for industrial environments, where equipment must be permanently installed in 19" cubicles or panels. Each rack has a standard height of 6U.
Each rack provides mounting space for up to 15 single-width VM 600 series cards, or a combination of single and multiple-width units.
204-042-100-011 ABE042 rack has a built-in VME backplane, which ensures electrical interconnection between power supply units, signal processing cards, acquisition cards, CPU cards, input/output cards, and I/O cards.
204-042-100-011 ABE042 rack may be powered by a single RPS 6U power supply unit. Optionally, a second power supply may be installed to provide redundancy. Various versions of the RPS 6U exist, enabling the rack to be powered from an AC or DC supply and allowing various supply voltages to be used.
The rear of the rack gives access to the IOC input/ output cards. These contain screw terminal strips or connectors for the connection of transducers/conditioners and for the input and output of various signals to an external control system.
Racks are generally already configured in the factory before delivery. The user, therefore, receives a ready-to-use system. Optionally, each card can be programmed at the site using the MPS1 or MPS2 software package (running on Windows).
Any rack position not used by a plug-in card can be covered by a blank panel.
(a) With AC Power Supply
(b) With DC Power Supply
ORDERING INFORMATION
To order, please specify the type, designation and ordering number :
| Type and Designation |
Ordering Number
|
|
|
ABE 040
|
Standard 19" rack, height 6U, including backplane
|
204-040-100-012
|
| 19" rack, height 6U, including backplane |
204-040-100-111
|
|
|
ABE 042
|
19" rack, height 6U, including backplane
|
204-042-100-012
|
|
Blank panel for rear of rack, 1 slot wide
|
200-505-001-011
|
|
Blank panel for rear of rack, 2 slots wide
|
200-505-002-011
|
|
Blank panel for rear of rack, 4 slots wide
|
200-505-003-011
|
|
Blank panel for front of rack, 1 slot wide
|
200-505-005-011
|
|
Blank panel for front of rack, 2 slots wide
|
200-505-006-011
|
|
Blank panel for front of rack, 4 slots wide
|
200-505-007-011
|