Bently Nevada 330400-01-00 and 330400-01-CN(05) accelerometer vibration sensors are used in critical machinery requiring measurement of housing acceleration, such as gear meshing monitoring. They are widely used in power plants, steel mills, metallurgical plants, chemical plants, oil refineries, petrochemical plants, and machinery factories. Mounting is done with a 1/4-28 UNF integral double-ended bolt. The 330400 is designed to meet the American Petroleum Institute Standard 670 requirements for accelerometers. It provides an amplitude with a 50 g peak and a sensitivity of 100 mV/g.
Sensitivity: 10.2 mV/m/s2 (100 mV/g) ±5% at 100 Hz
Acceleration range: Overall acceleration of 490 m/s2 (50 g) peak in the 1 Hz to 20 kHz band
Frequency response: 10 Hz to 15 kHz (600 cpm to 900,000 cpm) ±3dB; 30 Hz to 10 kHz (1800 cpm to 600,000 cpm) ±10%
330400-01-CN(05) suffix 05 multi-party license, CN is the certification body of China for installation in dangerous areas.
Accelerometer vibration sensor 330400-01-00 and 330400-01-CN(05) connecting cable: such as connecting cable 16925-20, connecting cable 16710-20
130539-XX 3-core shielded 1.0 mm2 (18 AWG) cable with 3-pin socket, one end with fluorosiloxane rubber sheath, the other end with terminal lug. Cable length is ordered in 1-foot increments. Maximum length 99 feet. Cable installation manual available (part number 133080-01)
16925-XX (22 AWG) cable with a 3-prong socket on one end and a terminal lug on the other
16710-XX 3-core shielded 0.5 mm² (22 AWG) armored cable with a 3-prong socket on one end and a terminal lug on the other
37439-01 330400 Accelerometer mating connector mounting base. Reduces base stress sensitivity. Available according to the A01 mounting thread option
37439-02 Mounting base, M8X1 to M8X1. Reduces base stress sensitivity. Available according to the A02 mounting thread option
43217 Accelerometer mounting assembly for use with extension cable part number 108576-01 and O-ring part number 04290422
Bently Nevada accelerometer vibration sensors 330400-01-00 and 330400-01-CN(05) work well with the Bently Nevada 3500 mechanical protection system. They are typically connected to the 3500/42M and the 1900/65A and 2300/20 dual-channel vibration monitors to detect vibrations in the unit and protect the machine.
330400-01-00
330400-01-05
330400-01-CN
330400-02-05
330400-02-CN