Product Introduction
HIMA F3238 8-channel safety-related digital input module can connect 8 digital input signal sources at the same time, and can quickly respond to changes in input signals to ensure the real-time performance of the system.
Technical Specifications
|
Brand |
HIMA |
|
Model |
F3238 |
|
Part Number |
984323802 |
|
Description |
HiQuad module |
|
Origin |
Germany |
|
Dimension |
30*20*7m |
|
Weight |
0.35kg |
Product Details
HIMA F3238 features:
Safety-related certification: It complies with the IEC-61508 standard and has obtained SIL3/CAT.4 safety level certification. It can be used in safety-critical applications to ensure the safe operation of the system under fault or abnormal conditions.
Automatic test function: During operation, the module can be automatically tested comprehensively, including cross-interference test of input signals, filter capacitor function test and overall module function test to ensure the reliability and stability of the module.
Line monitoring function: It has input line monitoring function, which can monitor the status of input lines in real time, such as line disconnection, short circuit and other faults, and send alarm signals in time, which is convenient for maintenance personnel to quickly locate and troubleshoot faults.
Hot-swap function: It supports hot-swap operation. The module can be directly plugged and unplugged during system operation without stopping, reducing system maintenance time and losses caused by downtime.
H51q System
The H51q system family comprises modular designed PES in single channel and redundant models.All input/output modules can be used with both redundant and single channel models of the central devices
All modules of the H51q system family meet the requirements for Electromagnetic compatibility and immunity according to article 10 of the EGguidline 89/336/EWG for the electromagnetic conformity). This is demonstrated with the sign within the data sheets of the modules. Also the systems and modules are wearing a sticky label with this sign.
The H51q system family consists of one 19 inch central rack 5 units high and up to 16 input/output racks in the 19 inch size 4 units high.
The central rack contains the following components:
– One or two (depends on the model) microprocessor-controlled central modules
– Up to three coprocessor modules, assigned to each central module
– Up to 8 interfaces RS 485 (2 on the central modules and 2 on each of up to 3 coprcessor modules) allows the connection of other systems resp. to built-up bus systems with PLC master with a transmission rate of up to 57600 bps
– One to three power supply modules 24 V DC/5 V DC to generate the 5 V DC operating voltage for the central modules and the control voltage for the input/output modules
– Power supply monitoring module with batteries to buffer the sRAM area and the real-time clock on the central modules
– Integrated cable tray
– Additional modules to connect and to decouple the supply voltage 24 V DC, to supply the watchdog signal and as fan plug-in unit with fuse and fan run monitoring
One I/O rack contains:
– Up to 4 power distribution modules to protect the input/output circuits
– One coupling module to connect the I/O bus, with fail-safe switch off of the watchdog signal in the case of a fault
– A maximum of 16 slots for input and output modules for digital and analogue signals.
Central Module F 8651
Coprocessor Module F 8621A
Communication Module F 8625/F 8626