Description
Technical Parameters
Product Introduction
TRICONEX 4000093-310 cables are part of Tricon's ESD system, providing transmission for communications in refineries, petrochemical, chemical plants, and other industrial processes.
Technical Specifications
|
Brand |
TRICONEX |
|
Model |
4000093-310 |
|
Part Number |
4000093-310 |
|
Description |
TMR Tricon Cable
|
|
Origin |
USA |
|
Dimension |
20*20*5cm |
|
Weight |
1.58kg |
Triconex Cable Introduction
Three types of cables can be used with the Tricon:
• Interface Cables
• Fanned-Out Cables
• Special Cables (Relay Loopback)
Interface Cables：
Interface cables are packaged with all termination panels. Each interface cable has a female connector on one end for connection to the male connector on a Tricon chassis backplane. The opposite end has a keyed male connector for connection to a termination panel.
Although the standard length of all interface cables is 10 feet (3 meters), you may order any length cable up to 90 feet (27.4 meters) in 10-foot increments using the last two digits of the termination panel's model number to specify length in feet. For example, specify 9xxx-x50 if you want a 50-foot (15 meter) cable instead of the standard 10-foot (3-meter) cable.
Fanned-Out Cables：
Fanned-out cables are a lower-cost alternative to using external termination panels. Fanned-out cables allow you to marshal field signals in a separate enclosure up to 99 feet (30 meters) from a Tricon. One end of a fanned-out cable has a female connector that connects to a Tricon chassis backplane. The other end of the cable contains 50 fanned-out leads, each individually labeled with its corresponding connector pin number.
Each fanned-out cable has the following characteristics:
• PVC outer covering
• 56-pin connector at one end
• 50 stranded, stripped, tinned and labeled 22-gauge leads at opposite end
Fanned-out cables should only be used with digital input and digital output modules. They are not certified for use with analog signals. Contact the Triconex Customer Support Center if you need a fanned-out cable for handling analog signals.
Although the normal length of all fanned-out cables is 10 feet (3 meters), any length cable can be ordered up to 99 feet (30 meters) in 1-foot increments, using the last two digits of the cable model number to specify the length in feet. For example, the model number 9101-050 specifies a 50-foot cable instead of the normal 10-foot cable.
Special Cables (Relay Loopback)：
If your application requires a special cable, it must be ordered separately. For example, if you want to verify relay activation on a relay termination panel using a digital output module, you must order a relay loopback cable to connect between the relay termination panel and a digital input module. Currently, the only special cable available is the relay loopback cable (914x-010).
| Triconex 3636T |
| TRICONEX 4507 |
| Triconex 4000066-025 |
| Triconex 3006 |
| Triconex 7400056-380 |
| Triconex 7400058-110 |
| Triconex 74000110-010 |
| Triconex 2750 |
| Triconex 4000029-025 |
| Triconex 3000348-500G0 |
| TRICONEX 400143-510 |
| TRICONEX 94-3825 |
| Triconex 4000056-006 |
| Triconex 2652-1 |
| Triconex 4000094-310 |
| Triconex 2500-2 |
| Triconex 7400120-100 |
| TRICONEX 8312 |
| Triconex 3501E |
| Triconex 8310 |
| Triconex 3807 |
| TRICONEX 3000470-510 |