Description
Technical Parameters
Product Introduction
TRICONEX DI3301 is a digital input module designed for Triconex safety instrumented systems. It is used to receive and process digital input signals from field devices and plays an important role in industrial automation, process control and safety systems.
Technical Specifications
|
Brand |
TRICONEX |
|
Model |
DI3301 |
|
Part Number |
DI3301 |
|
Description |
TMR Tricon DI Module
|
|
Origin |
USA |
|
Dimension |
30*20*6cm |
|
Weight |
1.58kg |
Product Details
TRICONEX DI3301 performance features:
1.High reliability: Adopting the triple module redundant (TMR) architecture, three identical channels independently execute the application program, and vote on all inputs and outputs through special hardware and software mechanisms to ensure the reliability and fault tolerance of the system.
2.Support for multiple input types: It can receive various switch signals such as dry contacts and relay contacts, and supports multiple input signal types and voltage ranges such as AC, DC, and high-speed pulses, which can adapt to the needs of different field devices.
3.Fast response: It has fast signal acquisition and processing capabilities, and the input delay is less than 10ms, which can meet the applications with high response time requirements.
4.Online diagnosis and repair: It has built-in online diagnostic functions, which can monitor the module status and input signal validity, can adaptively repair detected defects, support "hot" maintenance when the controller is running, and reduce system downtime.
5.Redundancy support: Supports redundant configuration to ensure that the system can continue to operate safely in the event of a fault, avoiding single point failures affecting the entire control system.
1.High reliability: Adopting the triple module redundant (TMR) architecture, three identical channels independently execute the application program, and vote on all inputs and outputs through special hardware and software mechanisms to ensure the reliability and fault tolerance of the system.
2.Support for multiple input types: It can receive various switch signals such as dry contacts and relay contacts, and supports multiple input signal types and voltage ranges such as AC, DC, and high-speed pulses, which can adapt to the needs of different field devices.
3.Fast response: It has fast signal acquisition and processing capabilities, and the input delay is less than 10ms, which can meet the applications with high response time requirements.
4.Online diagnosis and repair: It has built-in online diagnostic functions, which can monitor the module status and input signal validity, can adaptively repair detected defects, support "hot" maintenance when the controller is running, and reduce system downtime.
5.Redundancy support: Supports redundant configuration to ensure that the system can continue to operate safely in the event of a fault, avoiding single point failures affecting the entire control system.
Functional description:
1. Signal acquisition: Accurately collect digital signals from industrial sites, such as switch status, limit signals, alarm signals, etc., and convert them into signals that can be recognized by the control system.
2. Data processing: Each channel has an independent processing circuit and an 8-bit microprocessor (I/O communication processor), which is responsible for processing field data and communicating with the corresponding main processor.
3. Fault diagnosis: Continuously monitor its own status. If a fault is detected, the fault indicator light will light up and activate the system alarm. At the same time, it can identify specific channel faults, which is convenient for maintenance personnel to quickly locate and eliminate problems.
1. Signal acquisition: Accurately collect digital signals from industrial sites, such as switch status, limit signals, alarm signals, etc., and convert them into signals that can be recognized by the control system.
2. Data processing: Each channel has an independent processing circuit and an 8-bit microprocessor (I/O communication processor), which is responsible for processing field data and communicating with the corresponding main processor.
3. Fault diagnosis: Continuously monitor its own status. If a fault is detected, the fault indicator light will light up and activate the system alarm. At the same time, it can identify specific channel faults, which is convenient for maintenance personnel to quickly locate and eliminate problems.
If you have any order needs, please feel free to contact our sales manager：
Company: Joyoung International Trading Co., Limited
Atten: Smiling
Mobile/WhatsApp/Wechat: +86 18050035902
E-mail: info@htechplc.com
Website: https://www.joyoungintl.com/
Company: Joyoung International Trading Co., Limited
Atten: Smiling
Mobile/WhatsApp/Wechat: +86 18050035902
E-mail: info@htechplc.com
Website: https://www.joyoungintl.com/
