Product Introduction
PR6423/000-000 8mm Eddy Current Sensor,Non-contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, gearboxes, pumps and fans to measure radial and axial shaft dynamic displacement; position, eccentricity and speed.
Technical Specifications
|
Manufacture |
EPRO |
|
Model |
PR6423/000-000 |
|
Part Number |
PR6423-000-000 |
|
Description |
8mm Eddy Current Sensor |
|
MoOrigin |
Germany |
|
Dimension |
24*17*6cm |
|
Weight |
0.3kg |
Product Details
Performance
| Linear Measurement Range | 2 mm (80 mils) |
| Initial Air Gap | 0.5 mm (20 mils) |
| Incremental Scale Factor (ISF) | ISO: 8 V/mm (203.2 mV/mil) ± 5% @ temperature range 0 to 45°C (+32 to +113°F) |
| Deviation from best fit straight line (DSL) | ± 0.025 mm (± 1 mil) @ temperature range 0 to 45°C (+32 to +113°F) |
Measuring Target
| Minimum Shaft Diameter | 25 mm (0.79") |
| Target Material (Ferromagnetic Steel) | 42CrMo4 (AISI/SAE 4140) Standard Other (On Request) |
Environmental, General
| Protection Class | IP66, IEC 60529 |
| Operating Temperature Range |
Sensor incl. 1m Cable: -35 to +180°C (-31 to 356°F) Cable & Connector: -35 to +150°C (-31 to 302°F) |
| Material |
Sensor Tip (PEEK Polyether Ether Ketone), Case (Stainless Steel) Cable (PTFE Polytetrafluoroethylene), Connector (Brass, nickel-plated) |
| Weight (Sensor with 1m Cable) | Approx. 100 grams (3.53 oz) |
Compliance and Certifications
| CE |
2014/30/EU (EN 61326-1) 2014/34/EU 2011/65/EU |
| ATEX |
EN 60079-0 EN 60079-11 |
| IEC-Ex |
IEC 60079-0 IEC 60079-11 IEC 60079-26 |
| CSA |
CAN/CSA-C22.2 NO. 0-M91 CAN/CSA-C22.2 NO. 157-92 CAN/CSA-C22.2 NO. 213-M1987 CAN/CSA-E60079-15-02 (R2006) CAN/CSA-C22.2 NO. 25-1966 CAN/CSA-C22.2 NO. 61010-1-04 ANSI/UL Standard 913-2004 ANSI/UL Standard 1604-1995 UL 60079-15 2002 UL 61010-1 |
A. Case thread, M10x1 or 3/8-24UNF
B. SW 11 mm for M10 threads, SW 7/9-16 in for 3/8-24UNF threads
C. Standard cable diameter 2.8 mm (0.110 in), minimum bending radius 25 mm (0.984 in)
D. Armored cable diameter 6 mm (0.236 in), minimum bending radius 35 mm (1.378 in)
E. Optional Adapter Plug after 1m cable from Sensor
F. Cable Length (Tolerances 0... +10%)
G. Lemo connector (male), 11.0 mm (0.433 in) diameter or open cable end
Welcome to inquiry!
Ms.Smiling Sales Manager┃CHINA
Atten：Smiling
Mobile/WhatsApp/Wechat:+86 18050035902
E-mail: info@htechplc.com
Website: https://www.joyoungintl.com/
Address: Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen,China.