I/O Module 143729-01 BENTLY NEVADA PWA184202-03

143729-01 Cylinder Pressure I/O Module with Internal Terminations for Bently Approved Third Party Pressure Transducers.

This module is part of the Bentley 3500 system and can work together with other modules in the 3500 system, such as the power module, frame interface module, key phase module, monitor module, etc., to form a complete machinery protection monitoring system.

Install the Bentley 143729-01 module in a suitable location in the control room, such as a standard 19-inch cabinet, and secure it firmly with screws to ensure that the module is installed stably.

Connect the signal line from the sensor to the corresponding input channel of the module, making sure the connection is firm and not loose. Connect the power line to provide a stable 24VDC power supply to the module, paying attention to the positive and negative positions.

After the line connection is completed, check whether all connection points are firm, loose, or have problems such as virtual connection. Turn on the power and observe the status indicator of the module. If the indicator shows normal, you can use professional equipment or software to perform functional tests on the module to check whether the measurement data is accurate and whether the communication is normal.

Welcome to inquiry!

Ms.Smiling Sales Manager┃CHINA

Atten：Smiling

Mobile/WhatsApp/Wechat:+86 18050035902

E-mail: info@htechplc.com

Website: https://www.joyoungintl.com/

Address: Room 1904, No.96-2 Lujiang Road, Siming District, Xiamen,China.