3500/15 (Model: 106M1079-01) is used in the Bently Nevada 3500 series mechanical protection system. This module is primarily used to convert external alternating current (AC) into a stable direct current power supply required by the system, and to provide a unified power supply for all monitoring and protection modules via the frame's backplane. In the field of industrial equipment vibration monitoring, the Bently Nevada 3500 system is widely used for the protection and condition monitoring of critical rotating equipment (such as steam turbines, gas turbines, compressors, etc)
This module is installed in the power slot of the rack and converts the input power into the voltage required internally. It then supplies power to the following modules through the backplane.
Vibration monitoring module (such as 3500/42, 3500/44)
Axis displacement monitoring module
Communication module (3500/20)
Relay module
Data acquisition module
01
The 3500 rack supports the installation of two power modules:
Lower slot: Main power supply
Upper slot: Backup power supply
02
Stable DC output
Output Characteristics:
Output voltage: Approximately 24 VDC
Output current: Maximum approximately 5A
03
Wide-range AC input
This module supports universal voltages worldwide:
Input voltage: 85–264 VAC
Frequency: 47–63 Hz
04
Work environment capability:
Temperature range: -30°C to +65°C
Humidity: ≤ 95% (no condensation)
| Technical Specifications | |
|
Manufacture |
BENTLY NEVADA |
|
Model |
3500/15 |
|
Part Number |
106M1079-01 |
|
Description |
Universal AC Power Supply Module |
| Installation method | Rack-mounted insertion type |
| Power range | 120W–330W |
|
Origin |
USA |
|
Dimension |
30*25*12cm |
|
Weight |
1.34kg |
We are always at your service when you need
106M1079-01(3500/15) is an AC Power Supply Module manufactured and designed by Bently Nevada. It is mainly used in the Bentley 3500 series mechanical protection system to provide the required power support for monitors, sensors, and other equipment in the system. It is widely used in CNC machinery, metallurgy, oil and gas, petrochemical, chemical, paper printing, textile printing and dyeing, machinery, electronic manufacturing, plastic machinery, electricity, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, and other industries.
Performance characteristics:
Input voltage range: 110 to 220VAC nominal, non-hazardous area: 85 to 264VAC RMS; hazardous area: 85 to 250VAC RMS; 120 to 373VAC peak, input frequency is 47 to 63Hz.
Output stability: It can stably provide stable power output for electronic equipment such as 3500 series monitoring systems, and can maintain excellent power stability regardless of high-power or low-power loads.
FAQ
Q: What is the installation method for the module?
A: The 3500/15 adopts a half-height insert module and is installed in the dedicated power slot of the 3500 rack.
Q: What is the function of the LED indicator lights on the power panel?
A: The LED display module shows the status, including normal power supply (OK) and fault (FAULT), facilitating on-site diagnosis.
Q: Can a single module support the entire rack?
A: Sure, but it is recommended to use dual power redundancy for the key equipment to ensure safety.
Q: How long is the lifespan of the 3500/15 power module?
A: Industrial-grade design, capable of long-term use under normal conditions, with a typical service life exceeding 10 years.