3500/45E 285692-01 Proximitor Seismic Monitor

The 3500/45E Position Monitor is a 4-channel monitor that accepts input from proximity transducers, Rotary Position Transducers (RPTs), DC Linear Variable Differential Transducers (DC LVDTs), AC Linear Variable Differential Transducers (AC LVDTs) (Supported only in a 3300 rack upgrade (Encore 1.0)) and rotary potentiometers, conditions the signal to provide various vibration and position measurements, and compares the conditioned signals with user-programmable alarms.

The user can program each channel of the 3500/45E using the 3500 Rack Configuration Software to perform any of the following functions:

 Axial (thrust) Position

 Differential Expansion

 Standard Single Ramp Differential Expansion

 Non-standard Single Ramp Differential Expansion

 Dual Ramp Differential Expansion

 Complementary Differential Expansion

 Case Expansion

 Valve Position

The primary purpose of the 3500/45E monitor is to provide:

1. Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms.

2. Essential machine information for both operations and maintenance personnel.

Each channel, depending on configuration, typically conditions its input signal to generate various parameters called "static values". The user can configure Alert setpoints for each active static value and Danger setpoints for any two of the active static values.

Ordering Options：

Proximitor Seismic Monitor 3500/45E-AXX-BXX

A: I/O Module Type

    0 0 none, uses currently installed 3300 SIM or SIRM

    0 1 3500/45E Position I/O

B: Agency Approval Option

    0 0 None

    0 1 CSA/NRTL/C (Class 1, Div 2)

Spares：

285692-01      3500/45E Position Monitor

287199           Connector Shunt

288619-01      3500/45E Monitor Manual

287199           Jumper, 18 Pin, 2 x 9

100M2145-01 3500/45E Prox/DC LVDT/Rotary Position I/O