330130-080-00-00 3300 XL Standard Extension Cable

330130-080-00-00 is a standard extension cable for the Bently Nevada 3300 XL series proximity vibration monitoring system. This cable is used to connect the 3300 XL proximity probe with the Proximitor sensor. The length of this cable is 8 meters (26.2 feet), which is one of the standard lengths in the 3300 XL series and is mainly used for vibration, shaft displacement, and speed monitoring systems of rotating machinery.

330130-

-080  Cable Length Option： 8.0 meters (26.2 feet)

-00    Connector Protector and Cable Option： Standard cable

-00     Agency Approval Option： Not required

 

330130-080-00-00 is mainly used for transmitting signals from the proximity probe.
The proximity probe measures the distance variation between the metal shaft and the probe by utilizing the eddy current principle.
When the shaft vibrates:
Probe detection of distance variation
Generate electrical signals
The signal is transmitted to the Proximitor via the extended cable.
Therefore, the quality of the cables directly affects the measurement accuracy.

 

When installing 330130-080-00-00, please be aware of the following points:
1. Cable length matching
Ensure:
The length of the probe + the length of the extension cable = the required length of the system.

2. Avoid excessive bending
Minimum bending radius of the cable:
About 25 mm.

3. Preventing Oil Pollution
In an oily environment, it is recommended to use:
Connector protective cover
Sealing tape

 

The monitored equipment
│
│ Non-contact measurement
▼
┌──────────────────┐
│ Proximity Probe │
│ │
└──────────────────┘
│
│ Probe signal
▼
┌──────────────────┐
│ Extension Cable │
│  │
└──────────────────┘
│
│ Signal transmission
▼
┌──────────────────────┐
│ Proximitor Sensor │
│ │
└──────────────────────┘
│
│ Analog signal output
▼
┌──────────────────────┐
│ Vibration Monitoring System / PLC │
│ Bently 3500 / DCS │
└──────────────────────┘