About 3BSE042234R1 PP835
3BSE042234R1 PP835 is a 6.5-inch classic industrial Touch Panel from the ABB Panel 800 series, specifically designed for process control and equipment monitoring. This panel combines clear visual display with sensitive touch operation, serving as an ideal bridge connecting operators with the automation system. It provides an intuitive interface for equipment monitoring, data viewing, and process intervention for operators.
Product Parameters
|
Manufacture |
ABB |
|
Model |
PP835 |
| Part Number | 3BSE042234R1 |
|
Description |
Touch Panel, 6.5" |
|
Origin |
Sweden / Taiwan |
|
Dimension |
118*24*99mm |
|
Weight |
0.12kg |
Why choose ABB HMI Panel 80
1. The operation interface is intuitive, reducing the difficulty of on-site operation.
The 3BSE042234R1 PP835 Touch Panel is equipped with a color touch screen, which can present the device's operating status, alarm information, and key parameters in a graphical format.
For operators, there is no need to memorize complex operation procedures. They can complete operations such as viewing data and adjusting parameters.
2. Suitable for use in industrial site environments
3BSE042234R1 PP835 Touch Panel has been designed with the usage requirements of industrial environments in mind.
The front panel has good protection capabilities. Even when used in control cabinets with a lot of dust or in environments with relatively complex conditions, it can still operate stably and reduce the impact of the external environment on the equipment.
3. Facilitates compatibility with automated systems
3BSE042234R1 PP835 is usually used in conjunction with PLC or DCS control systems, and data exchange is achieved through communication interfaces.
When the operating status of the equipment changes, the operation panel can display relevant information in real time, facilitating the operators to promptly understand the production situation and carry out necessary operations.
4. Graphical monitoring enhances the level of production visualization
Using the configuration software, flowcharts, trend curves, or equipment status pages can be created on the screen.
This method enables the previously scattered data to be displayed on a single interface, making the equipment operation status clearer and facilitating on-site personnel to quickly determine the equipment condition.
Comparison of PP835 and PP835A
| PP835 | PP835A | |
| Series version | Panel 800 - Early Model | Panel 800 A Series Upgrade Version |
| System compatibility | ABB control system, PLC | ABB 800xA / PLC / DCS |
| Develop software | Panel Builder | Panel Builder 800 |
| Ethernet | RJ45 | RJ45 |
| RS232 | √ | √ |
| RS422 / RS485 | √ | √ |
| Power supply | 24V DC | 24V DC |
Core Difference:
PP835A is an upgraded model.
Better software compatibility
Support for the updated version of Panel Builder
More suitable for new projects or system upgrades
Selection suggestions:
If it is for the selection of an automation project:
New project → Recommended PP835A
Replacement of the old system → You can choose PP835
Requires long-term maintenance → Recommended product: PP835A
If the user's system is an ABB 800xA or a newer PLC system, it is recommended to directly use the PP835A.
PP835 Configuration Procedure (Engineering Steps for Panel Builder 800)
Installation engineering software:
Install on the engineer's computer Panel Builder 800
This software is used for:
Create an HMI project
Designing the scene
Configure PLC communication
Download the program to the panel
Connect the device:
Connect the PC to the HMI:
Common methods:
Ethernet (the most commonly used)
USB
RS232 / RS485
Ensure:
HMI has been powered on.
PC and HMI are on the same network. An An
IP address is communicable.
Open Panel Builder 80:
Steps:
Click "New Project"
Enter the project name
Select the device model
Choose:
PP835
Settings:
Screen resolution
Project path
Language
Design the HMI interface:
Create Screen
Drag and drop elements from the component library
Configure object properties
Configure variables:
The data displayed by the HMI comes from the PLC.
Variables need to be created:
Configuration steps
Open Tag Configuration
Create variable names
Specify the PLC address
Configure communication protocol:
The HMI must communicate with the PLC, and this configuration should be made in the Protocol Configuration section.
Steps:
Open "Config Protocols"
Add communication protocols
Set communication parameters
Required configuration:
PLC type
IP address Port
Communication protocol
Common Protocols:
Modbus TCP
OPC UA
Ethernet/IP
PROFIBUS
Download the program to the HMI:
Download steps:
Connect HMI
Click "Download"
Select device IP
Start downloading
After the download is complete:
HMI automatic operation project.
Everything Customers Need to Know
Q1: What are the differences between PP835 and PP835A?
PP835 uses CCFL backlight and CR2450 button batteries; PP835A upgrades to LED backlight and rechargeable batteries. Both have the same screen size, resolution, and interface. You can choose based on your budget and preference.
Q2: Can it be used outdoors?
The front panel has IP66/IP65 protection against rain and dust, but it is recommended to be installed inside a protective enclosure. Long-term exposure to direct sunlight or extreme temperatures may affect its lifespan.
Q3: Which PLC brands are supported?
It natively supports systems such as ABB AC 800M and Freelance, and can also be interfaced with third-party PLCs like Siemens, Rockwell, and Schneider through Modbus TCP/IP and OPC protocols.
Q4: What software is used for programming?
Use ABB Panel Builder 800 configuration software, which supports multi-language interfaces, alarm management, trend charts, recipe management, and other advanced functions.