Product Introduction
Module 87TS01K-E is a coupling module for connecting computers or external systems to the PROCONTROL system.
For this purpose, the module is equipped with a serial interfacetype RS232c or RS422 through which a process operatorstation POS, a programming, diagnosis and display systemPDDS, control diagnosis station CDS or another computer cancommunicate with the PROCONTROL system.
Technical Specifications
|
Manufacture |
ABB |
|
Model |
87TS01K-E |
| Part Number | GJR2368900R1510 |
|
Description |
Procontrol Coupling Module |
|
Origin |
Germany/SWITZERLAND |
|
Dimension |
30*21*5cm |
|
Weight |
0.5kg |
Product Details
The module can be used in any station belonging to thePROCONTROL bus system using a redundant 24 V modulesupply (starting with 89MS01/R0200 or 89MS02/R0100). lt isequipped with a standard interface for the PROCONTROLstation bus.
This module requires 2 divisions for mounting space. lt can beplugged into subrack slots with address wiring 1 through 58for the station bus.
The module uses a standard interface for participating in datacommunication within the PROCONTROL system.
The telegrams received from the station bus are checked forerror-free transmission.
Using a serial RS 232c interface, the module is capable ofreceiving instructions and data coming from a computer inaccordance with a defined protocol, as well as transferringinstructions and data to a computer.
The station-bus interface is responsible for conditioning thetelegrams to be received and transmitted through the station-bus interface.
The module uses two shared memories:
One 'receive shared memory' for the telegrams to be receivedand one 'send shared memory for the telegrams to be sent.The use of a standard station-bus interface limits the numberof receive telegrams that can be received at the same time toa maximum of 230,using addresses 0...229 of the receiveshared memory.
The number of send-location telegrams is limited to a maxi-mum of 200 at addresses 0...199 of the send shared memory,The exact number of receive or send-location telegrams isgiven in the application descriptions for the individual softwareversions.
The entire data exchange taking place between station-businterface and processing section is handled by the sharedmemories.
Processing section
Technical features are described in the relevant applicationdescriptions for the individual software versions.
For state and position of jumpers, cf. "Basic module settings'
Memory modules (for order numbers cf. 'Application description'")
①Memory module A401 (EPROM) Bus program for station-bus interface ②Memory module A104 (EPROM) User program
③Memory module A105 (RAM) Shared memory
④Memory module A106 (EPROM) Operating program for processing section, low byte
⑤Memory module A107 (RAM) Variables memory for processing section,low byte
⑥Memory module A108 (EPROM) Operating program for processing section, high byte
⑦Memory module A109 (RAM) Variables memory for processing section, high byte
ORDERING DATA
Type designation: Order number.
87TS01-E/R12. GJR2368900R12.
87TS01-E/R13. GJR2368900R13.
87TS01-E/R15.. GJR2368900R15.
ORDERING DATA FOR STANDARD ACCESSORIES：
89lP03 connecting cable
Type designation:89IP03/R0040 Order number:GJR2363100R0040
89lP04 resistor array
Type designation:89IP04/R0100 Order number:GJR2363200R0100
89lP05 connecting cable
Type designation:89IP05/R0005...R0020 Order number:GJR2363300R0005...R0020