ABB 88FT05C-E GJR2393100R1200

88FT05/R1200 features:
Data transmission and monitoring: Through the RS485 interface, the module can transmit station bus data and remote bus data between up to four Procontrol stations located in two mechanically coupled cabinets. It can monitor the character distortion of the message received from the remote bus to ensure trouble-free transmission, and monitor the message transmitter for overlong message transmission and the noise transmitter for overlong noise signals.
Signal conversion and generation: The module can generate the baseband signals required for message transmission on the two channels of the remote bus, as well as the noise signals required for confirmation and event detection. It can also convert the biphase signal of the remote bus into the serial mode signal of the RS485 interface, and vice versa.

Technical parameters:
Interface type: Equipped with RS485 interface of standard Procontrol remote bus branch line and interface for connecting with 88TK05 station bus coupling module. The data interface of the module is used for data interaction with 88TK05 station bus coupling module.
Working voltage: +24V working voltage is provided externally through RS485 interface, and its external terminal resistor is also powered by 88FT05 module.

Installation and use:
Installation method: It can be installed in the cabinet of Procontrol bus system and used with 88TK05 station bus coupling module. The specific installation location and method shall be determined according to system configuration and actual needs.
Configuration and programming: It is usually necessary to configure through special configuration tools or software, and set the communication parameters and working mode of the module according to the specific application scenario and system requirements.

ORDERING DATA
Order no. for overall module:
Type designation: 88FT05/R1200

Order no: GJR2393100R1200

Accessories:
Cable 89lK02 for dual-channel station bus coupling
Order no.: GKWE 602380R0090