Product Introduction
07KT94 GJR5252100R0101 is a PLC module from ABB, belonging to the Advant Controller 31 series. It can be connected to I/O expansion units via I/O expansion interface cables to expand the number of I/O ports. It can connect to various peripheral devices, enabling serial communication, EPROM writing, and other functions via cables.
Technical Specifications
|
Manufacture |
ABB |
|
Model |
07KT94 |
| Part Number | GJR5252100R0101 |
|
Description |
Basis unit
|
|
Origin |
Germany |
|
Dimension |
28*20*11cm |
|
Weight |
1.5kg |
Product Details
The basic unit 07 KT 94 works either as
· bus master in the decentralised automation system Advant Controller 31, or as
· slave (remote processor) in a decentralised automation system, Advant Controller 31 or as
· stand-alone central unit.
The device has a 24 V DC power supply voltage.
Main features:
· 24 digital inputs with LED displays
· 16 digital transistor outputs with LED displays
· 8 digital inputs/outputs with LED displays
· 8 individually configurable analog inputs 0...10 V, 0...5 V, ±10 V, ±5 V, 0...20 mA, 4...20 mA, differential inputs, Pt100 (2-wire or 3-wire), the analog inputs are also individually configurable as digital inputs
· 4 individually configurable analog outputs ±10 V, 0...20 mA, 4...20 mA
· 2 counters for counting frequencies up to 50 kHz, configurable in 7 different operating modes
· 1 CS31 system bus interface for system expansion
· 1 interface for connecting communication modules (e.g. 07 KP 90)
· Real-time clock
· LEDs for displaying operating conditions and error messages
· Detachable screw-type terminal blocks
· Fastening by screws or by snapping the device onto a DIN rail
· RUN/STOP switch for starting and aborting the program execution.
· Integrated Flash EPROM for storing program and data
· Exchangable Smart Media Card 07 MC 90 for user data or for updating the operating system or PLC program.
Connection of the supply voltage:
The 24 V DC supply voltage is connected via a 5-pole detachable screw-type terminal block. Please also take into consideration that supply voltages that are looped through are disconnected for the following devices when the plug is withdrawn. If higher currents are to be conducted without interruption possibility, the two wires for M have to be connected under the same terminal. The same applies to L+.
Ordering data:
Basic unit 07 KT 94 R101 Order No. GJR5 2521 00 R0101
Basic unit 07 KT 94 R161 Order No. GJR5 2521 00 R0161
Basic unit 07 KT 94 R201 Order No. GJR5 2521 00 R0201
Basic unit 07 KT 94 R261 Order No. GJR5 2521 00 R0261
