Joyoung International Trading Co., Limited

enLanguage
8618050035902
info@htechplc.com
ABB 3BSE018172R1 SB822 Rechargeable Battery Unit

ABB 3BSE018172R1 SB822 Rechargeable Battery Unit

Item Number:SB822 3BSE018172R1
Brand: ABB
Price: $520
Lead Time: In stock
Condition: New
Payment: T/T
Shipping Port: Fujian，China
Send Inquiry
Download
Description
Technical Parameters
Product Introduction
ABB SB822 3BSE018172R1 rechargeable battery unit, as an external power supply to provide backup power for AC 800M controller when the main power fails, ensuring continuous operation of the system and preventing data loss. It is installed on DIN rails for easy integration and fixing in the control cabinet.

3BSE018172R1 Rechargeable Battery Unit

 

Technical Specifications

 

Manufacture

 ABB

Model

 SB822
Part Number 3BSE018172R1

Description

 Controller Subrack Including Backplane

Origin

 Sweden

Dimension

16*10*6cm

Weight

 0.45kg

 

Product Details
SB822 Rechargeable External Battery Unit
The Li-Ion battery package is mounted inside the SB822 unit. To prevent problems you need to charge it regularly.
Specification for the battery package:
• Type: Rechargeable Lithium-Ion, 3.75V 2.3 Ah
 
Replacing the Battery in an SB822 Rechargeable External Battery Unit
To replace the Li-Ion battery:
1. Disconnect the TK821V020 cable connector.
2. Disconnect the 24V supply cable connector
3. Release the SB822 unit from the DIN-rail.
4. Attach a properly grounded ESD wrist strap to your wrist before you proceed.
5. Carefully remove the SB822 unit cover and identify the battery package.
6. Carefully disconnect the battery connector from the PCB.
7. Carefully remove the battery package.
8. Insert the new battery and connect. Reassemble is the reverse of disassemble.
9. Install the unit.
10. Dispose of the worn battery package in an approved manner.
 
Installing the SB822 Rechargeable External Battery Unit：
Use the following procedure to connect the rechargeable external battery unit:
1. At delivery, the Li-ion battery package is not internally connected. Follow the steps in the Data and installation sheet, which is enclosed in the packing box, to connect the battery package properly.
2. Mount the SB822 rechargeable external battery unit at a suitable position on the DIN rail.
3. Connect the 24V supply to the connector enclosed in the packing box.
4. Connect the 24V supply to the battery unit (X3)
5. Make sure that the AC 800M controller is powered and that the battery LED in the front of the PM8xx is flashing

6. Connect the SB822 rechargeable external battery unit, using the 2 m (2.2 yd) cable TK821V020. Plug one end into the battery unit and the other into the external battery supply socket of the PM8xx processor unit

7. Ensure that the green Power LED and the yellow Charge LED on the SB822 are both turned on.

8. In a redundant CPU configuration containing two PM858/PM861/PM862/PM864/PM865/PM866/PM867/PM891 processor units, use two SB822 battery units, one for each processor unit.

9. Due to the batteries being connected in parallel, it is necessary, when using the external battery, to remove the internal battery from the PM8xx in order to avoid reducing available memory back-up time.

Do not connect the TK821V020 cable until the AC 800M Controller has been powered up normally and the memory back-up function has been activated, that is, the B(battery) LED flashes. If no normal power supply is connected to the PM8xx processor unit, the CPU memory will immediately start to consume battery power when the cable is connected.

 

 

 

 
 
 

Hot Tags: abb 3bse018172r1 sb822 rechargeable battery unit, China abb 3bse018172r1 sb822 rechargeable battery unit manufacturers, suppliers, heat exchangers, industrial fans, industrial connectors, control panels, harmonic filters, human machine interfaces hmis