The Bently NEVADA 200350 accelerometer is a general-purpose, housing-mounted seismic sensor designed for use with the Trendmaster Pro Constant Current DC Input Card 149811-02 and Seismic DC Input Card 164746-01.
The 200350 and 200355 accelerometers are contained in a sealed, stainless steel housing. This design provides an extremely rugged sensor, ideal for harsh industrial environments. A 2-pin connector (MIL-C-5015) mounted on the top of each sensor facilitates installation and removal of the interconnecting signal cable. A 1/4-28 threaded hole on the bottom of the housing accommodates a variety of mounting options.
The 200350 and 200355 accelerometers contain a piezoelectric sensing device that generates an electrical charge when subjected to vibration. This charge is then electronically converted into a differential voltage signal that is proportional to the acceleration parallel to the sensitive axis of the sensor.
Sensitivity: 100 mV/g (±20%)
Frequency range: 30 to 600,000 cpm
Enclosure rating: IP68
Mounting thread: ¼-28 internal thread
200350-AA-BB-CC
AA Mounting Thread:
00 1/4-28 SS with Brass Tip, 0.5 in
01 1/4-28 to M6 x 1.0 BeCu
02 1/4-28 to M8 x 1.25 BeCu
10 1/4-28 Adhesive Stud Mount
11 M6 x 1 Adhesive Stud Mount
12 M8 x 1.25 Adhesive Stud Mount
BB Tolerance Options:
00 100 mV/g +/- 20%
CC Approval Options:
00 No Approvals
01 Multi Approvals (North America, ATEX)
CN China Approvals
Common models include:
200350-00-00-00
200350-01-00-00
200350-02-00-00
200350-10-00-00
200350-11-00-00
200350-12-00-00
Connecting cables for Bently Nevada 200350-11-00-00 and 200350-12-00-00 accelerometers: 9571-AA 84661-AA