Honeywell 51403698-100 SBHM Motherboard Assy 51403645-100

Honeywell 51403698-100 is a module in the TDC 3000 process control system. It is responsible for recording and storing historical process data of the TDC 3000 system so that operators can analyze historical trends and system performance.

Honeywell 51403698-100  Features:
Processor: Integrated on board.
SCSI: Integrated on board.
Storage media: Solid-state drive (SSD).
Storage capacity: 1.8GB per logical drive, supports one or two logical drives, provides redundancy, and offers greater storage capacity.
Compatibility: Applicable to R500 and above systems.
Dimensions: Standard LCN style printed circuit board size.
Operating temperature: -40°C to 85°C.
Relative humidity: 5%-95%, non-condensing.

Honeywell 51403698-100  Advantages:
Single-board design: Integrates the processor, SCSI, and storage media on one board, simplifying installation and system maintenance, reducing system complexity, and improving reliability.
Durability: Able to withstand extreme environmental conditions, ensuring long-term stable operation, suitable for a variety of demanding industrial application scenarios.

Honeywell 51403698 - 100 Installation Guide:
Preparation: Ensure that the installer has relevant electrical knowledge and safety awareness, and prepare necessary tools such as screwdrivers. At the same time, confirm that the installation environment meets the equipment requirements, including temperature (-40°C to 85°C), humidity (5%-95%, no condensation), and other conditions.
System power off: Before installing the module, turn off the power to the TDC 3000 system to avoid the risk of electric shock and equipment damage.
Determine the installation location: According to the system architecture and space layout, find a suitable location for installing the single-board history module. Usually, it will be installed in the cabinet of the TDC 3000 system, ensuring that there is enough space around the module for heat dissipation and convenient cable connection.
Module installation: Carefully insert the 51403698 - 100 module into the corresponding slot or mounting bracket, and fix it firmly with screws or other fixings, ensuring that the module is in good contact with the slot or bracket to avoid looseness.
Cable connection: Connect related cables, including power cables, data cables, SCSI cables, etc., according to the module manual and system wiring diagram. Ensure that the cables are firmly connected to avoid looseness or poor contact, and pay attention to the direction and layout of the cables to avoid interference with other devices or cables.
System power-on: After completing all connections, turn on the power of the TDC 3000 system, check the module status indicator, and confirm whether the module is started normally.