GE IS200SPROH1A MRP816600 BOARD

IS200SPROH1A is a terminal board used to connect and transmit signals and power in the circuit. It plays a role in signal distribution and transfer in the Mark VI series system, ensuring the normal electrical connection and communication between components.

Main components: There is a large terminal block made of solid black plastic on the left; there are two silver round flat capacitors next to it, one above the terminal block and one below; there are two large transformers in the center of the top upper edge, placed on a red base, the right one is marked as T1 and the left one is marked as T2, and there is a small resistor with a color band just below each transformer; there are two connector ports parallel to each other on the right side, and each port has multiple female connectors.

Technical parameters:
A/D resolution: 12bit.
Sampling rate: 5MHz, 2MHz, 1MHz, 500kHz..., 500Hz optional.
Memory depth (per channel): 512k samples/ch.
Trigger mode: support manual trigger, internal trigger, external trigger.
Working mode: online, offline (black box).
Signal input: V/Q or V/ICP.
Communication interface: RJ45 Ethernet interface.
Sensor excitation: bridge voltage 2V~10V/5~20mA, constant current 4mA/24V.
Power supply: built-in lithium battery.
Cascade: 1~16 units (32ch)