Description
Technical Parameters
Product Introduction
GE DS200FSAAG1ABA is a field power gate amplifier board for the Mark V series control system. It is mainly responsible for amplifying the field power voltage and supplying it to the motor. It is a vital component in the control system. Its normal operation plays a key role in ensuring the stable operation of the motor and the entire system. It can monitor the relevant electrical parameters and system status, and feed back the monitored information to other parts of the control system through a specific interface or signal transmission method, so as to achieve precise control and fault diagnosis of the system.
Technical Specifications
|
Manufacture |
General Electric(GE) |
|
Model |
DS200FSAAG1A |
| Part Number | DS200FSAAG1ABA |
|
Description |
FIELD SUPPLY AMPLIFIER |
|
Origin |
USA |
|
Dimension |
24*12*5cm |
|
Weight |
0.35kg |
Product Details
GE inspects and packs all equipment before shipping it from the factory. A packing list, itemizing the contents of each package, is attached to the side of each case.If the system is not installed immediately upon receipt, it must be stored properly to prevent corrosion and deterioration. Since packing cases do not protect the equipment for outdoor storage, the customer must provide a clean, dry place, free of temperature variations, high humidity, and dust.
Use the following guidelines when storing the equipment:
• Place the equipment under adequate cover with the following requirements:
− Keep the equipment clean and dry, protected from precipitation and flooding.
− Use only breathable (canvas type) covering material – do not use plastic.
• Unpack the equipment as described, and label it.
• Maintain the following environment in the storage enclosure:
− Recommended ambient storage temperature limits for the Mark VIe controller are from -40 to 85°C (-40 to 185 °F).
− Surrounding air free of dust and corrosive elements, such as salt spray or chemical and electrically conductive contaminants
− Ambient relative humidity from 5 to 95% with provisions to prevent condensation
− No rodents, snakes, birds or insects
− No temperature variations that cause moisture condensation
Condensation occurs with temperature drops of 15°C (59 °F) at 50% humidity over a four-hour period, and with smaller temperature variations at higher humidity.If the storage room temperature varies in such a way, install a reliable heating system that keeps the equipment temperature slightly above that of the ambient air. This can include space heaters or cabinet space heaters (when supplied) inside each enclosure. A 100 W lamp can sometimes serve as a substitute source of heat.
RELATED PRODUCTS
| DS2020UCOCN1G1A OC2000, Frount Mount | DS215TCDAG1BZZ01A DS200TCDAH1B Card w/Firmware |
| DS2020UCOCN4G1A OC2000, Operator Interface | DS215TCEAG1BZZ01A MKV, Emergency Overspeed Card w/FW |
| DS215DENQG3AZZ01A MKV, Lan Comm Card w/firmware | DS215TCQAG1BZZ01A MKV, Analog I/O Card w/firmware |
| DS215DMCBG1AZZ03A IOS, Processor & Comm Card | DS215TCQAP1BZZ01A MKV, Analog I/O Card w/firmware |
| DS215GHDCG5AZZ01A MKV, Control Card w/firmware | DS215TCQBG1BZZ01A DS200TCQBG1B Card w/Firmware |
| DS215KLDBG1AZZ03A IOS, Display Card with Firmware | DS215TMCBP1AZZ01A UCIBG1/LBC586P& FW MKV |
| DS215KLDCG1AZZ03A IOS, Display Card with Firmware for IOS | DS215TMCBP3AZZ01A UCIBG3/LBC586P& WS, CFLH, PANA |
| DS215SLCCG1AZZ01A MKV, Lan Comm Card w/firmware | DS215TMCBP3AZZ02A UCIBG3/LBC586P& WS, CFLH, PANA |
| DS215SLCCG1AZZ01B MKV, Lan Comm Card w/firmware | DS215TMCBP3AZZ03A UCIBG3/LBC586P& WS, CFLH, PANA |
| DS215TCCAG1BZZ01A MKV, Common Analog Card, w/Firmware | DS215TMIBP1AZZ01A STCAG1/LBC-586P, PANA + |
| DS215TCCBG3BZZ01A Analog I/O Card w/firmware | DS215UCIBG3AZZ01A UC2000, Controller Card Assembly |
| DS215TCCBG3BZZ01B Analog I/O Card w/firmware | DS215TCCBG8BZZ01A Analog I/O Card w/firmware |