Product Introduction
Technical Specifications
|
Manufacture |
ABB |
|
Model |
RF533 |
| Part Number | 3BSE014227R1 |
|
Description |
Subrack 12SU Including Backplane |
|
Origin |
Sweden |
|
Dimension |
50*30*33cm |
|
Weight |
8.5kg |
Product Details
The RF533 3BSE014227R1 is an open integrated industrial automation DCS component that can be matched with systems such as ABB Advant Master and Advant OCS. It can be seamlessly integrated into various industrial control scenarios and is suitable for building new control systems or expanding and upgrading existing systems.
19-inch standard width
Height 300 mm (12 SU)
Futurebus+ back plane.
Subrack for electronic modules with front connection of cables. Mount the subrack close to the back wall in a cabinetAdmittanceto to the rear side of the subrack is not necessary after the installation. Several slots for modules of different sizes are included. See the figure below. Each module is individually locked by a nap-on handle and serews. The back plane is raised 35 mm and provides test and connection facilities for the power supply and battery supply. A fan unit, RC527, is mounted beneath the subra.k This unit provides a cable duct to use for the cables connected to the modules.
Backplane Terminals:
2.1 V and 3.3 V Test of termination voltages
5 V Test of the 5 V power supply of the controller subraek
5VBACK Test of the RAM backup voltage 5
24 V/A resp. 24 V/B Connectionof systemm power supply 24 V(B used at redundancy)
VBAT/B reSp.VBAT/A Connection of NiCd battery (A used to double the battery capacity)
AUXx/y, PFAIL/x Conneetions not applied