Description
Technical Parameters
Product Introduction
GE 04220FL11232A is a product used in industrial automation and control systems. It supports multiple communication interfaces, such as Ethernet, serial ports, etc. It can exchange data with a variety of devices and supports various expansion slots to meet various industrial automation needs. It can increase functions and application scope by expanding other modules or devices.
Technical Specifications
|
Manufacture |
GE |
|
Model |
04220FL11232A |
| Part Number | 04220FL11232A |
|
Description |
MODULE |
|
Origin |
Germany |
|
Dimension |
15*15*4cm |
|
Weight |
0.25kg |
Mark* VIe Control System
The Mark VIe controller is a single board, which run the application code. The controller communicates with the I/O packs through onboard I/O network interfaces.The controller operating system (OS) is QNX® Neutrino®, a real time, multitaskingOS designed for high-speed, high reliability industrial applications.
Unlike traditional controllers where I/O is on a backplane, the Mark VIe controller does not normally host any application I/O. Also, all I/O networks are attached to each controller providing them with all redundant input data. This hardware architecture along with the software architecture guarantees that no single point of application input will be lost if a controller is powered down for maintenance or repair.
The controllers are designated as R, S, and T in a TMR system, R and S in a dual system and R in a single system. Each controller owns one I/O network (IONet). The R controller sends outputs to an I/O module through the R IONet, the S controller sends outputs through the S IONet, and the T controller sends outputs through the TIONet.
During normal operation each controller receives the inputs from the I/O modules on all networks, optionally votes the TMR inputs, computes the application algorithms including sensor selection if not voted, sends the outputs to the I/O modules on its own network, and finishes by sending data between the controllers for synchronization. This time line is known as a frame.
Communication ports provide links to I/O, operator, and engineering interfaces as follows:
• Ethernet connection for the UDH for communication with HMIs, and other
control equipment
• Ethernet connection for the R, S, and T I/O network
• RS-232C connection for setup using the COM1 port
More Products
| 154B5869P0002 VALVE, PROPORTIONAL, NG10/D05, BOSCH | 165A918DFP0001 ASSEMBLY - S150-01 ETD |
| 154B5917P0003 CABLE -LVDT 6 M. | 165A918DFP0033 Valve to S150 Manifold O-Ring Kit |
| 155D8110G0001 TBWD Test Card | 165A918DFP0041 S150 PRESSURE TRANSDUCER |
| 1572K16G700 Position Amplifier Card | 165A918DFP0071 PILOT FILTER CARTRIDGE |
| 1572K17G700 Eccentricity Card | 165A918DFP0101 Shut-off Valve Cartridge |
| 1589K27G700 Eccentricity (AC) Card | 165A918DFP0102 Dump Valve Cartridge |
| 1589K29G700 Alarm Card | 165A918DFP0104 Pilot Drain Header Check Valve |
| 1589K29G701 Alarm Card | 165A918DFP0105 Drain Header Valve |
| 1589K33G702 TSI, Differential/Rotor Expansion Card | 165A918DFP0134 ETD ASSEMBLY |
| 1589K33G704 TSI, Differential/Rotor Expansion Card | 165A918DFP0502 Operating Spares and 72 Month Rebuil |
| 1589K34G700 CARD -TSI | 1680-609 PICKUP-625-18 UL LISTED M |
| 1589K42G700 CARD TRIP-TSI | 1688-400 PROTECTOR-GE 130V RMS MOV |
| 1603-101 LUG, GROUNDING COPPER | 1688-402 Varistor, 250V 1000pF, Radial Leads |
| 1636-827 Cable, Bosch Proportional | 169C2766G0002 Voltage Sensor (24) Card |
| 1641-268 FUSE-1 AMP 3AG SLO-BLO | 169C2768G0002 CIRCUIT BOARD |
| 1649-550 RESISTOR - 2.32K 1/4W 1% | 169C2770G0002 Voltage Sensor Card |
| 164A5294P0001 Sensor,Speed,MPU, 70Vp-p, 40kHz, 15.9mmD | 169C2780G0001 First Hit Computer Card |
| 1693-518 TRANSFORMER - LIN VAR DIFF | 169C4740G0001 CB ASM/PLU ANALOG (K) |