Product Introduction
MMS6210 is a dual-channel shaft displacement measurement module produced by EPRO and is part of the MMS6000 machine monitoring system. The module is used to monitor and protect various types of turbomachinery, such as steam turbines, gas turbines, compressors, fans, gearboxes, blowers, centrifuges, etc.
Technical Specifications
|
Manufacture |
EPRO |
|
Model |
MMS6210 |
|
Part Number |
MMS6210 |
|
Description |
Dual Channel Shaft Displacement Monitor |
|
MoOrigin |
Germany |
|
Dimension |
24*17*6cm |
|
Weight |
0.23kg |
Product Details
| EPRO MMS6210 |
|
Channel clear/circuit fault sensingsystem; the internal modul supervisioncircuitry continuously supervises thefollowing functions. Sensor signal is within a preset window.Cabling between sensor and modul is ok(no shortcircuit, no break).System supply voltages are within presetwindows. |
Internal temperature not overloaded.System watch dog. During changing from a sensor malfunc-tion into the ok status or after switchingon the modul a delay time of 15 sec. isoperable. "Channel clear" is visualised on the frontof the module by means of a green LED,this LED switches off during a "channelfault"; during the delay time the LEDflashes. The channel status is also indicated via a |
binary output, separately for each of thetwo channels. Umax- 48 V dc Imax= 100 mA The reasons for a "channel fault" indi-cation can be read out via the communi-cation buses; which enables service per-sonel to take immediate corrective mea.sures. |
| Operating elements at the module front: |
| MMS6210 |
|
Two independent voltage outputs: identical to the transducer system inputsare available via SMB sockets; one foreach channel. |
2 green LED's: Indicate "channel clear" separately forchannel 1 and channel 2. |
4 red LED'S: Indicate "alert" and "danger" separatelyfor channel 1 and channel 2, for twopositive and two negative values. |
|
1 Mini-DlN diode type socket: As input for the configuration cableRS 232 communication interface. |
Handle: To pull out or insert modul with identi-fication labelling facility |
Dimensions
PCB/EURO card format acc. to
DIN 41494 (100 x 160 mm)
Width: 30,0 mm (6 TE)
Height: 128,4 mm (3 HE)
Length: 160,0 mm
Net weight: app. 320 g
Gross weight: app. 450 g
incl. standard export packing
Packing volume: app. 2,5 dm3
Space requirements:
14 modules (28 channels) fit into each 19" rack
Connection Diagram
