Product Introduction
YPC 111A 3AFE61004955 is used to distribute the TC link information from the APC to up to four inverters. It can also be used with the DDCTool.The board needs an external 24 VDC power supply that can vary in the range 19 - 30 VDC. Power consumption is 1.9 VA (80 mA at 24VDC).Max. The length of the fibre is 15 m with standard attenuation cable(Hewlett-Packard HFBR-R or equivalent) and 25 m with extra low attenuation cable (Hewlett-Packard HFBR-E or equivalent).
Technical Specifications
|
Manufacture |
ABB |
|
Model |
YPC 111A |
| Part Number | 3AFE61004955 |
|
Description |
C PCB Circuit Board |
|
Origin |
Sweden |
|
Dimension |
15*7*4cm |
|
Weight |
0.35 kg |
Product Details
YPC 111A 3AFE61004955 Product Features and Advantages
Modularity and Flexibility:
Equipped with standard DIN rails internally, allowing for flexible installation of modular electrical appliances such as ABB S200 and SH200 series miniature circuit breakers (MCBs) and residual current circuit breakers (RCCBs).
Provides ample space for wiring and cabling.
Safety and Reliability:
The enclosure is made of high-quality galvanised steel sheet, corrosion-resistant and robust.
The cover fits tightly to the enclosure, providing effective isolation and protection.
Easy Installation:
Pre-drilled knockout holes on all four sides and the bottom facilitate wiring entry from different directions.
The cover can be easily removed and installed, facilitating the electrician's operations.
Main Technical Parameters
Parameter Item | Specification Description
Product Series | Optic (YPC 111A belongs to this series)
Rated Operating Voltage (Ue) | 230/400V AC
Rated Insulation Voltage (Ui) | 500V AC
Rated Impulse Withstand Voltage (Uimp) | 4kV
Bus Rated Current | 125A (This is a key feature of this model, providing strong load-bearing capacity)
Protection Class (IP) | IP30 (Suitable for dry indoor environments)
Enclosure Material | Enclosure: Galvanised steel sheet; Cover: Thermoplastic (ABS)
Installation Method | Recessed installation (concealed mounting)
Compliant Standards | IEC 61439-3, GB/T 7251.3, etc.
External connection interface definition：
| External connections | Function |
| Power input | + 24 VDC to X1:1, common to X1:2. |
| Signal input |
Optical fibre from APC to V1, Optical fibre to APC from V2. |
| Signal outputs 4 pairs |
Optical fibres to drives from Vx. (x = drive number 1 to 4) |